Jump to content
SAU Community

Recommended Posts

far out ive never seen a site more over priced then these guys. i dont know the story as to why everything is so expensive but they have the goods and only they have it.

ive herd their quality is very good but far out some of their items are 4x more expensive then other places. ive been looking for a bonnet to fit the bonnet lip.

1_28_07_2006_13_09_Aero%20Bumper%20Top%20Mole.jpg

does anyone else know where i can get it? cuz i think 500 for a peice of plastic and 2grand for a bonnet with the front cut off...is a bit to much

Link to comment
https://www.sau.com.au/forums/topic/130350-power-play-import-prices/
Share on other sites

Most of their products are genuine FRP products eg: East bear and not cheap copies. They are afterall a business out to make money like any business...ppl who have the cash still buy them...you get what u pay for at the end of the day. But if you smart shop..."some" of the stuff on there you can get cheaper elsewhere...:(

The other thing is that they actually pay import duties and GST on goods. And when I say "they", I of course mean "you".

Certain other brokers, who will remain nameless, do their best to avoid you having to pay said monies so the perceived cost is less and so their business increases. That's why they can afford to sell you stuff so much cheaper than PowerPlay, because they don't have the same "overheads".

The responsibility for meeting Customs requirements is up to you. You can try blame the broker for not telling you or including it in the purchase cost, but ultimately when the taxman goes hunting you will be the target.

Whether they will prosecute you for evading to payment of duties on top of making you pay what is owed to the government is something I am not quite as familiar with. You take your chances....

I would be over the moon if I could find the bonnet I wanted for a measley 2k. If you want good stuff you pay big money it's a fact of life i'm afraid.

There are some cheaper options i'm sure. Powerplay will also backup there products with after sales support and warranty. Can't say that for Joe blogs working out of his lounge room.

anDru - I highly doubt you have ever tried to import high quality expensive Japanese parts from Japan, so you really dont know what your talking about.

As an example like Sewid said, I would and will happily pay $2k for a genuine East Bear carbon bonnet from Powerplay. These bonnets in particular cost over $1000 AUD to buy in Japan, shipping is very expensive, then there is GST, import duty and all the other costs associated with legitimately importing parts in Australia.

You pay for what you get, one day you might figure that out.

If you want to pay $500 for some cheap ass flimsy fibreglass bar for your GTT go right ahead :) Nobody here will loose any sleep over it.

i got my kit from powerplay and the fit quality was amazing and the communication was so much better then the rest . Like most ppl have said you get what you pay for.

If you look under the gallery section on powerplayes website you will see heaps of pics of my car :)

Edited by mr_crust
Thank You guys, your support is much appreciated :)

I don't think I need to elaborate on anything that has already been said, everything that the guys have said is true.

Thanks again guys

Tosh

If you take Tosh out for a dinner and a movie I'm sure he can organise some sort of discount :):)

There's no place like the backseat of a Honda Accord muttering the words...isn't it nice when everything just works :)

If you take Tosh out for a dinner and a movie I'm sure he can organise some sort of discount :):)

There's no place like the backseat of a Honda Accord muttering the words...isn't it nice when everything just works :)

:)

If you've ever seriously thought about importing a CF bonnet from Japan as well you'd know that getting one here is a huge roll of the dice.

They are far too large to come by post so must be put into a container. Even if packed right there is a big chance the corners or nose will be damaged or chipped and lets face it, you're not going to want to pay for it if it arrives broken.

Powerplay sort that for you and will take care that it's packed in the container right and that it will arrive in good condition for you to bolt on.

Tosh,

Can u PM me ur best price for the east bear LIP for the GTT with a standard front bumper delivered to Brissie 4113 as in the pics...

Thanks :)

No problems mate

Would you be able to email me please to the address in my signature. I have to go out for a while now so I'll be able to get back to you this afternoon.

Cheers,

Tosh

If you take Tosh out for a dinner and a movie I'm sure he can organise some sort of discount :):)

There's no place like the backseat of a Honda Accord muttering the words...isn't it nice when everything just works :)

Sounds like the two of you have a close 'bond'

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...