Jump to content
SAU Community

Recommended Posts

Hi guys,

I've just bought a r33 series 2 turbo, stock apart from pod, and 3 inch exhaust (mandrel bent) turbo back and hi flow cat. I'm putting on a turbotech boost contoller. I am sure this has been asked 1000 times before, but what is a safe level of boost to run (engine has done 55000km - thought to be close to genuine).

Any help much appreciated

Cheers

Jeremy

Link to comment
https://www.sau.com.au/forums/topic/130450-safe-boost-level/
Share on other sites

Jpowys 10psi is about the max id recomend but it is debatable some have run 14psi for long periods and some have let go at 10psi or less. with a stock intercooler on a hot day you may run into problems. Have a look at the r33 tuning guide on my site it provides good info and saves you searching all over the place.

cheers

obviously depends on the age etc..

up to 10-11 is cool, But should be fine for up to 12-14, but would recommend replacing it anyway though!

best to be safe than sorry!

some people go for second hand gtr's, dont go for that, just get a walbro or bosch, think they go for 040 and 044, also known as bosch motorsport pump

obviously depends on the age etc..

up to 10-11 is cool, But should be fine for up to 12-14, but would recommend replacing it anyway though!

best to be safe than sorry!

some people go for second hand gtr's, dont go for that, just get a walbro or bosch, think they go for 040 and 044, also known as bosch motorsport pump

Nothing wrong with a GTR pump....Much more reliable than the Walbro's.

Evil Wvl = If the standard GTST fuel pump performed to specs then it is suitable for around 225RWKW. Unfortunately, this is hardly every the case.

fuel pump....when would this start to not flow enough and with what mods?

and what do people replace their stock fuel pumps with?

(sorry to hi'jack thread)

I've about to install a fuel pump from a 300ZX twin turbo. Suitable for up to 260RWKW.

thanks for the replies guys. What is a upgraded fuel pump worth? Sorry GTR_legend, i was not sure what you meant by "040 and 044"... Do you mean $40 or $44 dollars? Also, once i have installed the BC and established what seems to be a safe boost level, is there anything else I need to do?

Edited by Jpowys
Sorry GTR_legend, i was not sure what you meant by "040 and 044"... Do you mean $40 or $44 dollars?

040 and 044 are models of Bosh Fuel pumps.

once i have installed the BC and established what seems to be a safe boost level, is there anything else I need to do?

Need to do? Start saving coz once you've got the mod bug it never stops. :)

i have read that with stock intercooler 10psi would be sufficient for daily driving - but dont take my word for it.

Im planning to put an aftermarket intercooler next year, and bumping up the turbo to 10psi - I believe any more than 10psi and the ecu will go crazy.....

I believe any more than 10psi and the ecu will go crazy.....

By go crazy you mean r&r? The ECU will only hit r&r when it detects excessive levels of knock/pinging. Some guys hit it at 9Psi. Some guys wont hit it till 13Psi. Some guys hit it earlier than others coz they use shitty fuels or have crappy injectors. So many more variables other then just simply upping the boost. The ECU does not ready how much boost you run.

R&R isn't caused by pinging or knocking, your motor will still ping and knock if its got normal unleaded petrol and no R&R kicks in to stop it, its caused by excessive air flow, in a series2 the max boost the stock ecu likes is 10psi, any higher and R&R kicks in, i know cause i have a S2.

When the stock ecu gets the reading from the AFM when boost is over 10psi it thinks something is wrong and starts the R&R as a safety net as not to stuff your motor. On S1's i think its about 12psi. But in saying all that i have also read that some people were able to get more from stock ecu's in S2's. I also thought the stock turbo runs out of huff past 12psi, anything over this and it just blows hot air. Plus you have to be careful that it doesn't throw the ceramic exhaust wheel out as this is the weak link in the turbo when boosted past 10-12psi.

Ohh and by the way, i don't think you did use the search button, this has been dicussed many times before.

this is what i think is safe you just got your car right, get use to the power it already has for a few months, you'll probably be trashing it everyday in the first 3 months, so its safe to run stock boost, (hint, with 10psi and trashing it everyday, bye bye turbo)

then get your turbotech, pur it on 10Psi you could try 12Psi on really cold nights just to c how it feels, run your 10 Psi all the time but to trash it in hot days, when you get a front mount you can trash it abit harder,

or maybe get that flick switch thing boostcontroller set it to 11Psi and stock, 11 cause you'nt be runing it all the time... get me...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...