Jump to content
SAU Community

Recommended Posts

not necessary just the mags faulty- you can only read about so many R33/s13-14-15/Supra etc. Nissan and Toyota never really replaced these cars with an new alternative.- so there is nothing new and exiting to talk about.

I feel the whole import scene has gotten rather boring- but that was always going to happen when Nissan and Toyota went down the granny road with their new line up (V35 etc) and Raws didnt help either. The way ANDRA and other have watered down the SC compact deal is also a major blow

Edited by gtr660hp
Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428310
Share on other sites

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

yes i got a bit tired of HPI when they started flogging the otomotto. everytime they bought a new product it made the 'news' section... nice one.

I have been a massive HPI fan and have been buying since issue 001. had a subscription for probably 4 years of so starting around issue 10. but this last year it just hasn't cut it for me.

i was also quite fond of speed. plenty of things I didn't like about it too, but it was a little different, and had some nice stuff in there.

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428315
Share on other sites

yes i got a bit tired of HPI when they started flogging the otomotto. everytime they bought a new product it made the 'news' section... nice one.

I have been a massive HPI fan and have been buying since issue 001. had a subscription for probably 4 years of so starting around issue 10. but this last year it just hasn't cut it for me.

i was also quite fond of speed. plenty of things I didn't like about it too, but it was a little different, and had some nice stuff in there.

pretty much spot on for me too. I own every issue, and one of the first issues with the 3 way GT-R test was what actually got me into the import scene many years ago before I had a licence, but now it is going down hill, and I'm unsure as to whether I'll continue my subscription.

SPEED was good for a light read, and had fantastic images and was really well produced. I didn't buy it for the tech, that's what HPI was for...

Sav: hahahahaha BANG

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428441
Share on other sites

I still read HPI although I haven't renewed my subscription as yet. I usually wait for the next dvd to be released but I might just bite the bullet and get a torch or an American Hotrod box set instead.

I buy a stupid amount of car magazines - mostly to get ideas from other motoring publications - to see how they've shot a particular car or how they've approached a certain subject. I read a few non-motoring mags as well.

My staple, monthly diet includes;

HPI

Zoom

Fast Fours

Street Machine

Autosalon

Dragster

ADRM

Drags

...and a couple of mags from the 'states - Fastest Street Car and RPM Magazine.

There are some that I buy only occassionally which include;

Hot 4's

Drift Battle

2DMax

Street Commodores

Street Fords

SM Fords

Some I read inside out the day I buy 'em. Some I just flick and will stop to read something that catches my interest. Mostly, the same trends are popping up in many of the titles listed above. It's just the way of the world.

Regarding the Otomoto ads in HPI, you should remember a couple of things;

Firstly, if you had a product that you sold/imported AND you had access to a national, monthly publication that thousands of people bought, wouldn't YOU give yourself a rap?

Secondly, a page of advertising in your magazine for your own product/service/shop etc is lost income from another advertiser.

Lastly, the new products sections in magazines are almost ALWAYS dominated by advertisers that are in that magazine anyway. You would think that companies would be crying out to have their products in that section of the magazines to get a bit of free advertorial but it's just not the case. We have to struggle to get new stuff sometimes which leads me back to the first point - wouldn't YOU give yourself a rap in this situation?

As has been suggested earlier, email Ben @ Hpi/Zoom/Driftbattle/otomoto/whatever .com.au and let him know what you as a reader actually think. That's what the letters to the editor section is for.

Cheers,

Adrian

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428660
Share on other sites

Ive been subscibed since issue 33 and im tracking down all the issues from before. im happy there are heaps more pages now but Im starting to like drift battle more because they do lots of hands on low budget stuff.

I wanna see some older imports too, theres heaps of them out there but I guess GTRs and silvias are more interesting

I really liked the articles on lesser known imports, the options and features on japanese cars are so much more interesting

speed was waaayyy too glossy and digitalised for me

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428828
Share on other sites

Actually the thng I used to like was they actually paid some attention to other than Drags. Now that is the only form of motorsport Zoom or HPI pays any attention to. I guess you don't mind that, Adrian!

I am partial to a bit of drag racing, yes :P

HPI has had the Nismo Speed Festival (is that what it's called?), some JGTC round info and still has some drifting (although obviously this has been scaled back due to drift battle mag). They also had some Time Attack stuff from Japan recently as well.

I like that stuff too!

Adrian

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428840
Share on other sites

do you work for HPI 2rismo? or another mag?

all good points. I never said I would not want to capitalise on the happy situation of being involved in a national car magazine, and being involved in selling car parts, but perhaps it's been a little over done that's all.

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428902
Share on other sites

I am partial to a bit of drag racing, yes :P

HPI has had the Nismo Speed Festival (is that what it's called?), some JGTC round info and still has some drifting (although obviously this has been scaled back due to drift battle mag). They also had some Time Attack stuff from Japan recently as well.

I like that stuff too!

Adrian

Yeah, but I would just like some technical content to go along with the pretty pictures. The Nismo festival stuff was great, but I know what most of the cars look like from the outside - it is the oily bits underneath that are more interesting.

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428905
Share on other sites

Can't speak for the rest of them but I'd imagine not. We're always on the lookout for good content that our readers might be interested in though.

I know within Express Publications, Martin Donnon does an aweful lot of tech writing. John Varetimidis seems to be popping up a lot as a consulting engineer answering readers problems in a few mags and publications like Street Machine have their own tech writers.

Adrian

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2428995
Share on other sites

Can't speak for the rest of them but I'd imagine not. We're always on the lookout for good content that our readers might be interested in though.

c'mon, let me in on the secret! who is "we"? :P

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2429060
Share on other sites

HPI got lame when it started focusing too heavily on drift

i like drift dont get me wrong... but i feel they were trying too hard to look "cool and hip" for all the newbie pooftas who just heard about drift and wanted somewhere to look at it.

havnt read it for about a year now

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2429107
Share on other sites

Regarding the Otomoto ads in HPI, you should remember a couple of things;

Firstly, if you had a product that you sold/imported AND you had access to a national, monthly publication that thousands of people bought, wouldn't YOU give yourself a rap?

Secondly, a page of advertising in your magazine for your own product/service/shop etc is lost income from another advertiser.

Lastly, the new products sections in magazines are almost ALWAYS dominated by advertisers that are in that magazine anyway. You would think that companies would be crying out to have their products in that section of the magazines to get a bit of free advertorial but it's just not the case. We have to struggle to get new stuff sometimes which leads me back to the first point - wouldn't YOU give yourself a rap in this situation?

As has been suggested earlier, email Ben @ Hpi/Zoom/Driftbattle/otomoto/whatever .com.au and let him know what you as a reader actually think. That's what the letters to the editor section is for.

Cheers,

Adrian

Hi Adrian, I agree 99% with what you said, except;

1. My ethics would stop me publishing a magazine and owning an import business selling parts that are obviously aimed at the same audience as the publications. Maybe that’s just me, but I don’t see how I can be impartial when I have my own interests to protect.

An example, Ben stuck a KKR turbo on the RB24 and the results (based on my opinion and experience) were disappointing to say the least. But there was zero critique, if it had been another turbo (not one of theirs) would it have copped a bagging? I would like to think so.

2. Product guides are great, except they have deteriorated into a list of products/suppliers with ZERO technical input. My daughter, who knows almost zero about cars, could prepare a better product guide for potential buyers. It’s the editor’s job to get content, if he/she can’t get it, then they aren’t trying hard enough.

3. The letters to the editor are for guys asking advice on their cars, not for feedback on the magazine itself. Hence why Martin mostly writes the responses. I can’t say as I have ever seen a critical (of the magazine) letter ever printed.

Don’t get me wrong, I know how hard it is working against printers deadlines. I used to write 4 or 5 magazine articles a year and I remember the editor was always on my back to finish them in time for review and sending to the printer.

:P cheers :)

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2429163
Share on other sites

Thanks mate :P Just a quick point or two:

1. My ethics would stop me publishing a magazine and owning an import business selling parts that are obviously aimed at the same audience as the publications. Maybe that’s just me, but I don’t see how I can be impartial when I have my own interests to protect.

I think it's just you :) Although someone with the same ethical convictions as you could be a great operator by ensuring that only truly great products were sold and promoted, your own included.

2. Product guides are great, except they have deteriorated into a list of products/suppliers with ZERO technical input. My daughter, who knows almost zero about cars, could prepare a better product guide for potential buyers. It’s the editor’s job to get content, if he/she can’t get it, then they aren’t trying hard enough.

All product guides are going to be part advertorial, part editorial and part pure ad content. It's just the nature of the beast. I like it when there's some solid, factual information or even an entertaining story at the beginning of the guides so everyone gets some value out of it - even those readers with no interest in the advertorial or ad components get some benefit that way.

3. The letters to the editor are for guys asking advice on their cars, not for feedback on the magazine itself. Hence why Martin mostly writes the responses. I can’t say as I have ever seen a critical (of the magazine) letter ever printed.

Is that because of structure or because they're the only letters they get? HPI prints letters that say how good they are - I bet if they got one or two raising problems with the mag they'd print them too. It's good to get more than just positive feedback.

Don’t get me wrong, I know how hard it is working against printers deadlines. I used to write 4 or 5 magazine articles a year and I remember the editor was always on my back to finish them in time for review and sending to the printer.

AHHHHH!!! Tell me about it!!!!

Adrian

Link to comment
https://www.sau.com.au/forums/topic/130970-hpi-mag/page/3/#findComment-2429202
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...