Jump to content
SAU Community

Recommended Posts

  • Replies 103
  • Created
  • Last Reply

Top Posters In This Topic

I think its always been like this with the 8's.

My old VS 5ltr 5speed would get around 16l/100km's locally then on the open road a whopping 9.2L/100km's.

Yeah, I think so too man. I guess this is what they were designed for though, freeway cruising.

Yeah, I think so too man. I guess this is what they were designed for though, freeway cruising.

Pre VZ and late VY was the end of lean cruise due to EPA wanting to reduce NOx levels (NOx emmssions go up when there is a lean burn condition) which when combined with photochemical smog causes ozone depleting gases. THis is where they got there good economy from as under crusie conditions the engine was barely running. A typical early model VY GENIII would command an AFR in lean cruise of about 17-18:1. This is how they got there good highway figures.

That said I have no idea how they get those highway figures now. Holden is probably just lying and or enable the test car with lean cruise. Have seen them do dodgier stuff to get around emmissions.

but i saw one of the holdens up close the other day. and from the front it really does look like a lexus, and from the back like a BA falcon.

holden says it was deisgned from the ground up, starting 6 years ago, so it is a 6 year old car. and since it probably looked like a 6 year old car holden just stole the design of current cars to make it look like a new car.

The Commodore range looks good as, the SS especially. It might be the pics i've been looking at of the HSV but the taillights look out of place, seems as though the only changed them for the sake of being different to the commodores.

Those pictures released by HSV just don’t capture the magnificent lines of the car. I love the new HSV design, looks great. It has a sleek, powerful, European and strangely Australian design. I love the new LED lights – even Euro models don’t have LED signal lights. Good job HSV.

With the new MRC suspension this new HSV should out handle most cars on the road. Again good job HSV for introducing a very advanced suspension setup - Only the fifth (?) vehicle to introduce MRC in the world (along with Ferrari’s top of the line model, Audi TT, Corvette and top of the line Cadillacs).

The back actually looks more like a fancied up Audi.

_F4U0522.jpg

_F4U0187-2.jpg

_F4U0447.jpg

_F4U0408.jpg

And I just love the side profile

_F4U0243-2.jpg

Huge ass brakes (remember these are 20 inch rims).

_F4U0119.jpg

_F4U0128.jpg

From Eastonchang and LS1.com.au, visit for more pics.

don't worry holden never does anything for the first time, always catch up. Euro models, at least BMW have had LED for 2-3 years. brake/signals, everything.

Holden will always be behind, i'm not knocking the car... but that's just the way it is.

Car looks mean, lights look weird..

now what do ppl think of a SS/HSV (don't know if they're the same) spoiler on a R34? :O

Pre VZ and late VY was the end of lean cruise due to EPA wanting to reduce NOx levels (NOx emmssions go up when there is a lean burn condition) which when combined with photochemical smog causes ozone depleting gases. THis is where they got there good economy from as under crusie conditions the engine was barely running. A typical early model VY GENIII would command an AFR in lean cruise of about 17-18:1. This is how they got there good highway figures.

That said I have no idea how they get those highway figures now. Holden is probably just lying and or enable the test car with lean cruise. Have seen them do dodgier stuff to get around emmissions.

I believe this to be so as prior to the ecu and cams the old VS on the open road would get around 11L/100km's.

The back of that HSV is absolutely revolting. They musta been drugged when they designed it.

Hahahahah.........its an Astra on the roids...needs to be drugged tested. Major amount of work had to be done on the VE platform to conform with the V8 Supercar blueprint....BAN VE :(

Hahahahah.........its an Astra on the roids...needs to be drugged tested. Major amount of work had to be done on the VE platform to conform with the V8 Supercar blueprint....BAN VE :)

they should have called it the VD model ..it looks like the clap to me...46%of it made in thailand and korea.. hope of some of worst VD around :(

newer spec, improved engy... im liking it... decent suspension you say, read i must.... if they have finaly goten away from the truck rolers, il even consider this over my next car, as so far the choice was going to be an evo.... hmmm... except this will have towing capacity, something to toke my traily's with aye.... hmmmmmm going to look into it.... 2 tonnes though..... not a selling point..... good what 400-600 kilos haevy than evo... apples an oranges yea... but a decent sedan is what i need

haha my next post was gonna be about the laillights being from an MX-5. theyve really raided mazda for design cues...

poor effort. Youd think before they start pressing panels, that theyd have a look at their design and think 'hhmmm. i dunno. it looks like a mazda. maybe we should try originality, just to see how it goes...'

  • 1 month later...
don`t forget to ask about the 23 components allready recalled ...only been released a week and allready recalls :laugh:

Holden recalls new Commodores

7:48 AM October 19

Holden has issued a national recall of its new Commodore after the discovery of potential fuel problems.

The recall affects VE and WM series models made in July and August this year.

The Federal Government's consumer recalls' website says in extreme cases, the vehicle may develop a fuel leak.

The website says a fuel hose that connects with the main fuel line may have been manufactured incorrectly.

Holden spokeswoman Maya Donevska says concerned customers should contact their dealer.

Ms Donevska says a potential problem with the fuel hose arose during production.

"At one of our supplier plants, during the fuel hose assembly process, there is a chance that a misalignment may occur, if that misalignment may occur, there is a chance that the fuel hose might get a small tear in it," she said.

"Having said that, there's been no reported incidents in the field, it's something that we've picked internally during routine checks."

Source: ABC

More Finance news

WHAT A DOG !!!! a billion dollars for this POS..

the first in long line of recalls to come no doubt :woot:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...