Jump to content
SAU Community

Recommended Posts

  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

And don't forget guys, this car does a 10.04 sec 1/4 mile according to the owner. It was published in this month's Autosalon magazine, full write up on the car....

Was at Dutton Rally at Sandown and overheard the owner claiming it had done a 10.04 sec 1/4 mile in Japan.... :D

Is it just me or does anybody else find that hard to believe???

500ps + 1500kg = 10.04??? :D

Oh, and why didn't they say what mph it reached??

Still, I'd buy one..... :laugh:

And don't forget guys, this car does a 10.04 sec 1/4 mile according to the owner. It was published in this month's Autosalon magazine, full write up on the car....

Was at Dutton Rally at Sandown and overheard the owner claiming it had done a 10.04 sec 1/4 mile in Japan.... :nyaanyaa:

Is it just me or does anybody else find that hard to believe???

500ps + 1500kg = 10.04??? :dry:

Oh, and why didn't they say what mph it reached??

Still, I'd buy one..... :sleep:

Everyone talks it up... just some go further than others...

It has a lot more than 500ps :/

Really?? Has it been modified beyond Nismo Z-Tune specs?? Or is Nismo underrating the power??

Here's the specs according to Nismo: http://www.nismo.co.jp/Z-tune/data_e/6.html

They also claim it weighs 1600kg, I thought it would have been 1500kg with all the carbon fibre.

Then again all the diff/trans coolers would add weight...

So blacksx, how much power has it got?? I'm curious... :)

  • 2 weeks later...
And don't forget guys, this car does a 10.04 sec 1/4 mile according to the owner. It was published in this month's Autosalon magazine, full write up on the car....

Was at Dutton Rally at Sandown and overheard the owner claiming it had done a 10.04 sec 1/4 mile in Japan.... ;)

Is it just me or does anybody else find that hard to believe???

500ps + 1500kg = 10.04??? :)

Oh, and why didn't they say what mph it reached??

Still, I'd buy one..... :(

I don't find it hard to believe, the data was recorded on Nissan's own test course so I'd be happy to believe it were true.

If it came 4th, who came 3rd, 2nd, and 1st?

P.S. dream car there...

Team Outright

1. Mitsubishi Lancer EVO VI

2. Whiteline EVO VIII

3. Mitsubishi EVO 3

The Z Tune actually scored enough points to place 2nd outright however it was docked points by the officials for some "circular antics" in the pits/carpark

The proto version would run 10,s but the one;s they sold would no way go 10.02.

In plenty of best motoring vids the Proto version is way faster/quicker and looks like a 10 sec car but in videos with the street version the car no where near moves, revs or sounds quick enough for a 10, It was struggling to catch a new corvette down tsukuba and didnt catch it not to metion the S205 Sti that was in front of them both.

See for yourselfs.

GTR R34 Z -Tune Proto vid at Nurburgring--

http://www.youtube.com/watch?v=735zkR7xTgw

GTR R34 Z-Tune 500ps production model-

http://www.youtube.com/watch?v=-emo2QIMmeY

There is another video of the Proto at Nismo festival Fisco and it came 3rd the vid isnt on Youtube anymore.

1st was ATTKD BNR34 GAIAX

2nd Mines BNR34

3rd Z-tune Proto

4th MCR BCNR33

The proto had closer to 800ps no cat converter and more agressive tune that would go 10.02, the production one would of never kept up with the mines GTR

Edited by nismo 400 R N1
The proto version would run 10,s but the one;s they sold would no way go 10.02.

In plenty of best motoring vids the Proto version is way faster/quicker and looks like a 10 sec car but in videos with the street version the car no where near moves, revs or sounds quick enough for a 10, It was struggling to catch a new corvette down tsukuba and didnt catch it not to metion the S205 Sti that was in front of them both.

See for yourselfs.

GTR R34 Z -Tune Proto vid at Nurburgring--

http://www.youtube.com/watch?v=735zkR7xTgw

GTR R34 Z-Tune 500ps production model-

http://www.youtube.com/watch?v=-emo2QIMmeY

There is another video of the Proto at Nismo festival Fisco and it came 3rd the vid isnt on Youtube anymore.

1st was ATTKD BNR34 GAIAX

2nd Mines BNR34

3rd Z-tune Proto

4th MCR BCNR33

The proto had closer to 800ps no cat converter and more agressive tune that would go 10.02, the production one would of never kept up with the mines GTR

Thought so, the specs just don't add up...

The proto sounds like it had no restrictions like the production model has...

Thanks for the info!!!!

I can't say for sure if this Z-Tune could run a flat 10 or not.

However what I can say is that in the Dutton Rally Vic this year the Z-Tune on the Airport run ran a best time of 15.46s.

It should be noted that Mark Berry's best time for that event is 15.76s and Mark has run a 10.4s 1/4 mile. So the Z Tunes drag time was under Marks time and Marks 10.4s was done on R Comps.

Having competed against the car there is no question it's a decent bit of kit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...