Jump to content
SAU Community

Recommended Posts

Booked in my r32 gtst for a $14 pedders suspension check, seeing as I've only had the car for a week would like to know if there are any problems to be fixed.

Results were:

Shock absorbers:

Left front: 27

Right front: 27

Left rear: 22

Right rear: 24

Pedders stated new shocks are rated 22, so nothing needs to be fixed there.

Only problem were:

Upper inner bushers worn $137

Slight play lhs mounts moving

LAB $132

Wheel align $55

Total ~ $324

Should I go ahead and book the service with pedders?

Also spoke to the person about pedders extreme suspension vs japanese made, he says pedders australian built and made for aus conditions plus not as stiff as imported :(

Thanks

- Patrick

Link to comment
https://www.sau.com.au/forums/topic/132237-pedders-suspension-check/
Share on other sites

what is a LAB?

For inner arm bushes you should check out whiteline or notlec adjustable camber bushes.

Alignment price is good for a 4 wheel alignment but make sure you get the other work done first

Pedders charge $110 for a 4 wheel alignment.

The above quote is just the front wheel alignment

For bushes & your suspension needs its hard to go pass Whiteline items. Also, if Pedders had some idea about the Skyline they would of advised you to have a 4 wheel alignment done. SydneyKid has listed - Centeline Thomastown; & Traction Tyre & Suspension Rowville, as reputable suspension places in VIC.

I took my GTR into Pedders up here for the $14 check & dropped a few comments as hooks-in-the-water to see if they'd bite & yep, they sure did!!

Firstly they wouldn't let me in the workshop to SHOW me what needed to be replaced, which to be fair is the letter of the law BUT then they came back with a list of needing to completly dis-assemble the rear-cradle & replace all the bushes along with the front steering-rack being shot & needing to be re-built or replaced. Stupid $$$ & 2wks later I could have my car back.....

I then took it to a mates workshop & put it on the hoist. The car needs a RH front tie-rod end, a front CV-boot & not a lot else. Whilst the rest isn't brand-new, it doesn't need replacing right now either.

Anyway that's my experience, make of it what you will

that's pretty cheap. most good place i know charge between 100 and 150 if we are talking:

adjust front toe

adjust rear toe

adjust front castor

adjust front camber

adjust rear camber

that's a fair bit of stuff to do, and after doing camber things must be checked again as it can affect castor. and after doing castor another check is required. so it takes time.

I took my GTR into Pedders up here for the $14 check & dropped a few comments as hooks-in-the-water to see if they'd bite & yep, they sure did!!

Firstly they wouldn't let me in the workshop to SHOW me what needed to be replaced, which to be fair is the letter of the law BUT then they came back with a list of needing to completly dis-assemble the rear-cradle & replace all the bushes along with the front steering-rack being shot & needing to be re-built or replaced. Stupid $$$ & 2wks later I could have my car back.....

I then took it to a mates workshop & put it on the hoist. The car needs a RH front tie-rod end, a front CV-boot & not a lot else. Whilst the rest isn't brand-new, it doesn't need replacing right now either.

Anyway that's my experience, make of it what you will

Mate you could take a new car their and they would say it would need changing. :P

When the inspection was finished, they left my car on the hoist and asked me to follow him into the workshop. He then showed me what was wrong and what needed to be fixed, then lowered the car and printed out the invoice etc.

Havent done anything yet, looking around at other options.

Thanks :)

Pedders and my local import speciallist gave me an identical list of suspension issues, so I figured that what they were telling me was reasonable. Always get a second opinion if you think you're getting taken for a ride!

Or could it be that Pedders and my mechanic are conspiring against me?!?!?!

Pedders and my local import speciallist gave me an identical list of suspension issues, so I figured that what they were telling me was reasonable. Always get a second opinion if you think you're getting taken for a ride!

Or could it be that Pedders and my mechanic are conspiring against me?!?!?!

Mate you never know.

These pedders outlets are franchises and i spose its the luck of the draw of which one you take it too.

They probly get a 6 week training course of how too rob people legally and get thrown into the business without a clue. Some pedders may be good depends on the owners. All they want is profit which im sure everyone wants, but not robbing people they way they do it.

My experience never go back.

Edited by subzeroR33

But wouldnt Joe Blow who "specialises" in Skylines and other imports would wonna rip you just as much as Pedders in this case? At the end of the day, everyone wants to make money. If you really want to save a buck, become friends with a mechanic and get him to check your car over, this is the only way.

My family friend mechanic told me today that you dont need to machine all disk rotors when changing brake pads... often its not needed at all but 9/10 places will tell you to do it, why? more money for them.

I cant imagine how much chicks get ripped everytime they service their cars...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...