Jump to content
SAU Community

Recommended Posts

Hi there,

I am very interested in the R33 GTR xenon type lights. I have a pic attached for those who arent sure about what im talking about. Just wanted to know whether these lights would fit onto an R33 GtsT? any help would be great

thanks.

post-11487-1156923185.jpg

Edited by SLYLNE
Link to comment
https://www.sau.com.au/forums/topic/132270-r33-gtr-xenon-lights/
Share on other sites

Hi there,

I am very interested in the R33 GTR xenon type lights. I have a pic attached for those who arent sure about what im talking about. Just wanted to know whether these lights would fit onto an R33 GtsT? any help would be great

thanks.

Apparently not. You need to get the fitted properly, it aint a simple "remove and fit" job.

Also they cost 2K!

Firstly, sII is a very difficult fit. The bonnet/front bar is actually a different shape.

SI i beleive can be made to fit quite easily, because the headlights are the same shape. the brackets are slightly different, so will require slight mods. the grill probably won't bolt on, but that's fine, just get a gtr fibreglass grill for $100.

I've actually sourced a set of gtr xenons from japan and they're coming in. Don't hold your breath waiting for me though, i'm very busy with uni atm.

Thanks for your help guys,

also what difference is there with the S1 GTR and SII GTR headlights?

No difference at all, series III are a little different besides the fact that they are projector xenons.

Any R33 Gtr H/lights will fit series I ( only S I) but you have to modify them a little to fit .

You have to take off the rear spacers ( easy to do) and they dont have a bottom braket where they fit on the grill .

lolz..nah not 2k, i think itz around 600bux for the two.

If you can get them for $600 per pair, ill buy them of you for $800 and you can make $200 a pair .

They sell for over 100,000 Yen used !

Yep, in all my searching I saw one complete set with ballasts and bulbs for about 800 delivered, the rest were exxy.

That would have to be around the 50,000 yen, I would say there was something wrong with them at that price ....

I agree with wrxhoon. I paid about 2k landed for mine. I looked ages for some, the cheap ones were usually damaged or didn't come with ballasts or were the series 1 with retrofitted HID bulbs (crap)....

If you can get them for under 2k landed you've got yourself a good deal.

When retrofitting the S3 lights to a S1 or 2 GTR, do they plug straight in, or is a rewire of the headlight loom needed aswell? Some where down the track i'd like to fit these to my GTR, standard headlights are terrible.

When retrofitting the S3 lights to a S1 or 2 GTR, do they plug straight in, or is a rewire of the headlight loom needed aswell? Some where down the track i'd like to fit these to my GTR, standard headlights are terrible.

Nothing wrong with the standard S I+S II GTR h/lights mate . Make sure you get the full 13.8-14 volts on them and they light up very nice( they are never going to be like genuine xenons though). In my old 33 i wire them with a rely and made the lows stay on when the h/beams went on as well, excelent light .

When retrofitting the S3 lights to a S1 or 2 GTR, do they plug straight in, or is a rewire of the headlight loom needed aswell? Some where down the track i'd like to fit these to my GTR, standard headlights are terrible.

They pretty much plug straight in. You will have to file/cut the plug very minor to get them to fit, the plug is the same shape, but has the 'guide' lines in different places... just cut/file them away and it fits perfect.

  • 8 months later...
Nothing wrong with the standard S I+S II GTR h/lights mate . Make sure you get the full 13.8-14 volts on them and they light up very nice( they are never going to be like genuine xenons though). In my old 33 i wire them with a rely and made the lows stay on when the h/beams went on as well, excelent light .

G`day mate

Can you please help. I`ve finally found genu. R33 GTR Xenons headlights for my baby, but they have no bulbs or ballasts. I cant find exact info. so i can purchase them. I`d like to go as similar (specs) to OEM as possible.

Any help much appreciated

Regards Martin

Agreed. A set went for 101,000 yen last night and that would've been a very good buy at that price. It was a bargain. that equals about $1200 - $1500 landed depending on your buyers arrangement.

Lol just read this threads from 2006... oh well.

G`day mate

Can you please help. I`ve finally found genu. R33 GTR Xenons headlights for my baby, but they have no bulbs or ballasts. I cant find exact info. so i can purchase them. I`d like to go as similar (specs) to OEM as possible.

Any help much appreciated

Regards Martin

Well you can buy Nissan ballasts and bulbs if you're keen. They might be expensive but it's worth a shot:

Ballasts (ACTUATOR ASSY-HEAD LAMP) 26055-98U00

Xenon Bulbs (BULB-XENON) 26297-89901

You will need a series III GTR VIN number in order to order parts for these. Here's one i picked out of the air that turned out to be valid: BCNR33-043434

No idea where you are but if you're in Sydney order Nissan parts from Crows Nest nissan parts counter or Hornsby nissan parts counter for best chance of success.

Good luck!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...