Jump to content
SAU Community

Recommended Posts

OK! heres a Question who the nissan fast can idendify the interior trim colour and type? can you tell me how you did it? is says C

~~ hc33 003262 ~~

I hate the comon poo coloured laurels but there is a black/grey interior i would kill for. FAST says it has a build date of 89 01 so it would be eligable for import just missing the 88 model cut yes? i think its 89 jan and older that makes it. sorry but im learnin haha

m guessing he mean BNR32 not HNR

heres the result

<<<<< P.S. how do i see the 'attached thumbnails' as I can't see anyting here.

Thanks for having a look guys, just went and double checked and go the other number if that helps.

HNR32-007303

with : KRNR32RGFSLMEB

the car is a gts4 not a gtr if that helps

thanks

Stephen

should just be a small thunbnail you can click on.  

found the HNR number after i entered the model code then entering the 2nd part of the HNR code...bit strange...anyway here you go

thanks for doing that, only one prob for me at the moment is that I can't see any thumbnails. is there a setting in IE that stops me from seeing thumbnails

..

again , any help appreciated.

thanks

Stephen

I have a S3 GTR apparently could be a 98...go figure. Having alot of trouble getting parts for the gearbox as it is different to all other GTR's for some reason. The car has factory leather also...weird. I also have a 56K issue. Could someone help me Pls. =)

here are all the details I could find

E-BCNR33

Chassis BCNR33-043389

Model GGJPRWFR33ZZA-EQ-C (changed)

FS5R30A (Trans type?)

RC41 (paint?)

thanks

matt

That's not a valid chassis number as far as FAST is concerned.  Double check it.  Probably explains why Nissan can't identify the correct parts.

I double checked and it definately has BCNR33-043389 on the blue plate and fire wall. Maybe checking a few numbers out might give me an idea... ie 043387,043390, etc.

According to others my gearbox is the same as a R32 GTR ? not sure how that works.

Which part refers to the date of manufacture?

I double checked and it definately has BCNR33-043389 on the blue plate and fire wall. Maybe checking a few numbers out might give me an idea... ie 043387,043390, etc.

According to others my gearbox is the same as a R32 GTR ? not sure how that works.

Which part refers to the date of manufacture?

FAST says that GTR #043388 was manufactured in April 1998, while 043390 was an Autech GTR also manufactured in April '98. Only Nissan knows why your car VIN is invalid, but you might be able to get away with buying parts using the 043388 number since at least theoretically yours should use the same production parts.

Yours should have a late series pull clutch type GTR gearbox, but I suppose it's possible an R32 GTR gearbox was fitted as a replacement at some time.

The date of manufacture is determined from the complete VIN.

FAST says that GTR #043388 was manufactured in April 1998, while 043390 was an Autech GTR also manufactured in April '98.   Only Nissan knows why your car VIN is invalid, but you might be able to get away with buying parts using the 043388 number since at least theoretically yours should use the same production parts.

Yours should have a late series pull clutch type GTR gearbox, but I suppose it's possible an R32 GTR gearbox was fitted as a replacement at some time.

The date of manufacture is determined from the complete VIN.

Ok, cool. Sounds like it could well be a 98...crazy, can't say I've ever heard of a Series 3.5. Makes sense tho with the weird stuff it has on it, like big sump oil cooler, leather and nismo dials.

What is an AUTECH ?

I checked as my clutch and box is out and the clutch is a pull type. I'm going to the gearbox specialist tomorrow to check if some parts i orderd for a 12/97 and newer fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...