Jump to content
SAU Community

Recommended Posts

Hey guys. might sound like a stupid question but the other day i got a pod filter, was quite nice, really enjoyed the sound, but am getting very annoyed by it now. It is extrememly loud. I havn't done anything to the car yet and when i do i wanna focus on day to day driveability (maybe cos i drive it heaps). So i wanna sorta quiet zorst etc. But this pod filter is so freaking loud. I have no hope of driving it quietly. My gf is whinging which is not good!*hence my post* But yea besides takin it off is there another trick i could do to make it a little more quiet. (when i say its loud, during peak hour traffic, with the stereo on, fans on, its still very very noticeable, let alone driving at night, gave me a headache!!!)

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

hehe...

I have just put the standard airbox and filter back on my skyline.

I have owned 4 Imports and all have hod pods with CAI boxed but have never used the stock airbox.

All I can say is DAMN it is quiet with the stock airbox/filter. I will be modding the box to fit a pod in it and a cold air intake feeding the bottom of the box.

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2484026
Share on other sites

My HKS filter is pretty damn loud too, but unlike yourself I really don't mind it. Nowadays it just feels weird driving a car and not hearing the noise.

MMMM weird without the token apexi whistle.... dont know what you can do other than try out a few pods? i love it though

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2486255
Share on other sites

Attached some photos. Yea its really loud. I think the fact its sorta in the fender, the sound really gets amplified somehow. Think i will get some sound deadening material or something and stick it in there somehwere. its weird cos its dead quiet until the turbo starts up, then you can basically hear every whine it makes.

and don't get me wrong it sounds pretty nice (abit weird as its abit outta place without the exhaust note to back it up) but i drive it heaps and sometimes i wanna hoon othertimes i wanna take it easy, and when taking it easy its just so freaking annoying! All i wanted was a meaner sorta sound, now its just like HEY>>>>>I GOT A TURBO>>>>>AND ITS NOW REALLY LOUD SO EVERYONE CAR HEAR!!!!!! Cos i don't mound about the blow off sound but its the enormous sucking sound the moment the turbo spools. NEWAY. fun fun. will see what ppl think about the sound deadening. Cos i wouldn't know where to start with making a box for it.

The guys at Trojan put the pod on + adaptors, they left the little scoop thing as to provide some cool air constantly going towards the pod. Definatly feels alot more responsive! Heres the pic

post-27977-1158059632.jpg

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2486645
Share on other sites

i dont have an apexi pod, i've got a 'f(_)cknoes' pod. but doesnt that adapter pipe look way long?

looks like the pod is shoved right into the inner guard. i might be wrong, maybe soemone with an apexi can comment.

here's a pic of mine, adapter has minimal length.

post-29392-1158060756.jpg

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2486715
Share on other sites

The best way to get rid of the sound and keep your pod is to upgrade the turbo.

It sounds silly, but i loved the pod noise and with a loud exhaust i had a harmonious syphany :D. Hi-flowed my turbo, then later replaced it with a HKS turbo and on both accounts the pod noise was nowhere near as loud as with the std turbo :).

I now have a very quite exhaust and i still can't hear the pod, just the revs from the engine and the spooling of the turbo, etc, but no sucking noise from the pod :mad:

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2486735
Share on other sites

bah bah bah hhahahaha, sorry shouldnt laugh if you ever hear mine well the others will tell you,

I have a HKS pod on stock trubo and oh shit it use to chatter and give the best induction note ever but yes very loud espeisaly with the vented bonnet.

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2487004
Share on other sites

interesting, they said its a really good spot as it stays the coolest and with the air comgint through the little scoop it will stay the coolest. But yea seemed alittle too far in. Paid 30 bucks for the adapt, sure won't be forking out another 30 bucks netime soon for a shorter one. But probably is the problem. lol its sooo loud. so dosn't suit a standard white sedan ;-) ill have a look around and see how cheap i can get a shorter adaptor, of if someone would swap with me. (may suit another application).

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2487009
Share on other sites

i dont have an apexi pod, i've got a 'f(_)cknoes' pod. but doesnt that adapter pipe look way long?

looks like the pod is shoved right into the inner guard. i might be wrong, maybe soemone with an apexi can comment.

here's a pic of mine, adapter has minimal length.

Offftopic i know - tony you don't happen to work out by the airport there do you?

I swear i've seen those wheels on a car out there....

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2487653
Share on other sites

i dont have an apexi pod, i've got a 'f(_)cknoes' pod. but doesnt that adapter pipe look way long?

looks like the pod is shoved right into the inner guard. i might be wrong, maybe soemone with an apexi can comment.

here's a pic of mine, adapter has minimal length.

Mukyb0y,

Did you buy the pod that is on your car at the moment?

From the pictures it looks like the one i had on my car for a while (Was sold to me as a Blitz filter but was a $20 supercheap filter).

If it is, change to a brand name (ie. Apexi, HKS etc) and you will not believe the difference you will notice.

After changing from that to a HKS pod, it felt like i had bolted on a new turbo. More response and alot more power (car was wheelspinining after 4k rpm).

Link to comment
https://www.sau.com.au/forums/topic/133899-pod-very-loud/#findComment-2488051
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...