Jump to content
SAU Community

Recommended Posts

The R33 went well on Sat night & ran it's best time of

9.508 @ 153.03 mph on a 1.66 60' time.

I would like to thank Mark, Mick,& Tyson from Tilbrooks, Darren & David from Adelaide Engine Developments, Martin Donnon, &

Nate Stevens for all their help & support.

Good on you guys - a new Australian record on street tyres -

even if it was only by .002 of a second!

Looks like I will hang on to the 2835R turbos a bit longer & see

what we can do with them.

Link to comment
https://www.sau.com.au/forums/topic/13486-950-153-mph-at-air-5403/
Share on other sites

Thanks, I'm happy to hold the record for a while -

until Mario runs his GTR on Nittos that is.If he does

it will certainly raise the bar(no pun intended!)

Keir also has a pair of T67s on the way & records

are there to be broken so will be interesting to see

what happens over the coming months.

In the meantime, my R33 runs out of rego soon so

will be doing a bit of cruising - took it for a burn today

to a local car park to take some photos with the other

GTRs - not looking forward to standing next to a copper

with the bonnet up, but if it happens it happens.

Not having mirrors is a bit of a pain. If they were behind

me I wouldn't see them & I definately wouldn't hear them!

But then again - with over 700hp at the wheels I don't think

anyone would be behind me for long (other than Keir of course)

Bring it on Kabab - long drive to Sydney though.

Maybe at Drag Combat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...