Jump to content
SAU Community

Recommended Posts

hi guys can any body help me 1 of my mates want to find an ex-drift car or street/drift car does any1 no any sites to find them or an importer that specialises in them.... i have check heaps of website only to find lighty modded car and if i can buy direct from japan.

any info would be great

Link to comment
https://www.sau.com.au/forums/topic/137159-importing-a-roaddrift-car/
Share on other sites

not 100% sure, but pretty sure that for a car to be complied it has to be pretty much stock- that means exhaust, cooler, etc. so when you get it imported you may have to buy a heap of stock items to fit to the car, or if you go through an importer they may be able to sort that out for you.

  • 1 month later...

i only really know about importing car's for race rally use.

to import a car thats not going to be RWC'd and street driven you need to have a level 3 cams license, (or a national license)

My advice is you have to be very serious about doing it, e.g. the cost of a license is around the $1200 to 1300 a year + medical checkup + log booking + something else that i can't remember + you have to be a member of a cams approved club.

Your car, should you choose to import a race rally vehicle, will have to fit your vehicle with a cam's approved roll cage and probably other safety stuff that i can't remember right now.

ummm sorry lost my train of thought, check out the CAMs website, i can't remember it now, but google is your friend.

SKY031, ahhahaha, Trogdor The Burninator, ahahah that brings back good memories.

there really isn't such a thing as a level 3 license anymore... but the new equivalent is basically the national racing license.

In any case there's only two ways to bring in a "ex-drift" car:

find something made in or before 1988, or

bring one in as a race import (which means it can NEVER be road registered).

Now from my experience, 99.9% of people who ask for an ex-drift track car or a street drift car don't have the necessary licensing needed to bring in a race import... and most often they want to road register the car too once it arrives. If you fall into either of these stereotypes, then unfortunately your only solution is to buy a 1988 or older car. So this means signing with an importer and waiting till a S13 or cefiro, which has been thrashed to an inch of its life by a japanese dude with no respect for his $1500 beater (with dori dori mods) comes up for sale :( Or you could buy an older R31, FC RX7 etc that's moderately well maintained then thrash it to an inch of its life yourself ;) Just keep in mind you'll be competing with about 100 other aussies who have the same notion in their noggins.

You are better off buying a car locally, and taking it to a workshop and having them set it up for you. If you're down in melbourne, come see us at Driftline (link) we get silvias, skylines etc traded in cheap pretty regularly, and we've converted em from scratch (from seam welding the chassis to setting up suspension to engine swaps). We've even got a couple of demo cars for sale if you can't wait :)

there really isn't such a thing as a level 3 license anymore...

Yeah i just left the "level 3" name in there cause some importers are still calling it that, prestige motorsport use to call it that, not sure if they do.

But anyway yeah, funkyz got the goods.

  • 2 weeks later...

what are the costs involved in importing a car (Freight, duty and any hidded costs) and where is the best place to find a modded r32 gtr for track use only!???

What price would i be looking at for the car and do i need any special licence to purchase it as i have been also told this before??

Any help would be appreciated.

Thanks.

costs involved in a race/rally import are exactly the same as any other import except that there is no compliance fee.

You still pay freight, duty and GST on the FOB.

You need a CAMS PC or PR license or higher to import, and a race history for the driver and planned events for the car.

As Shan said you can never get full rego on a race/rally car, you can get limited registration on a rally car that lets you drive it to and from CAMS events, practice days and workshops

what are the costs involved in importing a car (Freight, duty and any hidded costs) and where is the best place to find a modded r32 gtr for track use only!???
Freight's around $1800, duty depends on how much you spend on the car etc. There is no hidden costs, well, that depends on who you use. Sometimes during compliance you get stung with cost of new brake pads and tyres, but if you're gettin a race import then there's no such thing as compliance.

For an R32 GTR I'd suggest buying a regular lightly modded (that can get thru compliance) R32 GTR, and bringing it in under the SEVS scheme, and then modifying it yourself in Australia... its cheap enough here. The cost of modded R32's are still pretty high in japan, plus you have to compete with buyers from the UK New Zealand, most of Europe, the Middle East, Hong Kong and Canada. If you were to get one thru SEVS you can register it for road use whenever you want, which is great for the resale value. Race imports can NEVER be registered for road use.

What price would i be looking at for the car and do i need any special licence to purchase it as i have been also told this before?
Modded R32's range from as low as 10k landed for one that's been thrashed to within an inch of its life and will most probably need a new engine after you thrash it that extra inch.... and as high as 23k+ for highly modded ones (eg: this, this, and this). If you're asking what license you need to get, then you're a long way away from being able to bring in a race import (it takes about a couple of years to get all the necessary licenses that let you get a race import). Then you need to show active participation in official events, and a demonstration of why you NEED to have a special import to compete.
www.king-buyer.co.jp

i think thats it. they seem to have plenty of drift cars some ex d1, they seem very pricey though. But the cars they sell look like quality

king buyer also comes with really crappy service, a redundant website that lists cars weeks after they're sold etc... the list goes on and on.

basically they're a japanese dealership that's realised that if you show some whitey's from the US, UK, Australia etc some eyecandy they'll pay thru the nose for em (so they WILL milk you for all you've got). 90% of the time when you contact em the car's sold (long before they're listed), and they'll show you some "alternates" that are just as good... well in their eyes anyways. The cars you see on their site is just bait that's been prettied up :miner:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...