Jump to content
SAU Community

Recommended Posts

Hi guys,

I was just wondering if anyone has experienced trouble once getting over 300wrkw with an RB25DET. The engine has enough mods under the sun to support it but once you start to run a fair whack of boost(~1.5)the power just drops off after 4500-500rpm thought it was spark so we put in a CDI and didnt seem to help. it seem to be pointing to weak valve springs springs but it has tomei springs, only standard cams though, runs approx. 8.7:1 compression and a 107 or 109 RON fuel. Anyone got any ideas?

Has anyone every had trounble with there VVT/VCT or whatever its called?

Any thoughts would be helpful thanks fella's

Cheers :(

Luke

Link to comment
https://www.sau.com.au/forums/topic/138519-trouble-over-300rwkw-with-rb25det/
Share on other sites

Is the CDI working properly? What condition are the coil in or does CDI replace the coils?

personally i wouldnt have chosen the CDI route, the HKS ignitor box thingy is the way to go, keep the stock coils that way

What about the exhaust?

Care to list all the mods/specs etc? Might be something a miss in there :(

I'm fairly new to the RB engines, but in alot of other engines, it'd either indicate turbo running out (Although this would equate to a pressure drop, which you haven't mentioned) or most likely the heads/cam aren't flowing enough.

Coil have been replaced with the CDI system theres enough spark there to light half of tassie :dry: I think the turbo is a GT3540? So its not outta puff. Exhaust is 3.5" so that shouldnt be a problem. This is not my car, im just trying to find out some info for them. The head is also ported so that shouldnt be a problem.

On the dyno graph it heads straigh up looking like its gonna too 400kw but then get to 4500-5000rpm and just falls over, not a miss but just faids away and makes around 300-320rwkw

Edited by muaythailuke

I cant see it being the head its not like it was hugly ported just cleaned up the dags etc. I dont think its the dyno either as they have had more powerful cars on there without trouble with wheelspin.

I will try and get the dyno graph scanned onto computer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...