Jump to content
SAU Community

Recommended Posts

ok so I've got my head back on and everything seems pretty good so far. Good old 3.0L purring away.

Been driving around a bit but the f**king battery dropped a cell. Left me on the side of the road. Won't buy century again, thats for sure. Its only 8 months old.

can anyone recommend a tuner down your way that will do a tune on a weekend? going to need a tune before the easter cruise

ecu's a Link g4.

thanks

rob

I do Powerfc, Link, and Vipec. ANd on a weekend, because I am not a workshop.

Can't do it on a dyno though, will need to be a street tune.

I do Powerfc, Link, and Vipec. ANd on a weekend, because I am not a workshop.

Can't do it on a dyno though, will need to be a street tune.

thats ok i prefer street tunes, will pm ya when i have a free weekend.

Disapointing results from my car today...... Only managed 240rwkw @18psi

Considering the turbo I have is supposed to be an improved version of the GT2835 Pro S, its quite annoying, Pro S turbos have easily seen 260rwkw and I have all the supporting mods to achieve that.

Going to do a compression test when i find some time and motivation, Bit of a blow spending all that money to achieve what I could have got with a high flow.

Data on the HKS GT2835 KAI for those interested:

HKS GT2835 KAI

thats not that bad of a result :cheers: , what suporting mods do you mean? and also remenber your in tropical mackay with huge heat and humidity!!!!!!!!!!!! do you have w/m injection? if not thats the best bang for buck and you'll get that figure your looking for. i garentee you who ever got 260rwkw would be at the same level if they came up here and hit the dyno. was that with robbie doing your tune? and pluse i would like to see the dyno chart i bet its got a great respone on that turbo so all the power would be in the mid range which would equal wheel spin city :rofl: but that depends on what your looking for. if it made great tourqe than who cares about hp even though i crap on about it still stuck on the old days of how much hp it makes not what tourqe did it produce. i bet its fun to drive though :cool:

Yeah I'm just disapointed that i spent so much on it when I could have gone for a hypergear for alot cheaper.

The Pro S's have got great figures, Joeyjoejoe on here has pushed over 300rwkw with E85, and was running 280ish rwkw with 98.

I wasnt targetting such high levels, but nice to know the turbo wasnt at its full potential in case I wanted to wind everything up

Dyno's correct horsepower loss from heat through intake air temp sensors (well as far as I'm aware anyway) so realistically same dyno in 2 different locations should read fairly similar

Its def fun to drive, Will be better when my 18's come. But still is a bit of a disapointment

Mods I have are:

Nismo 555cc

tomei in tank fuel pump

3" intercooler piping (stainless) with GKTech intercooler

Splitfire coilpacks

Power FC

Z32 AFM

NPC 10" Sprung Button clutch

3" turbo back exhaust (XForce)

Full HKS GT2835 KAI Kit (intake pipe, lines etc)

Thats all I can really think of atm, Think thats it

Hadnt thought about water meth but I dont think thats the issue. ATM I cant be bothered spending any more money on it, spent enough already and I've lost alot of motivation right now, so maybe in a few weeks I will see.

Pretty sure it's the turbo hey. Might try and get a pro s tune off someone and compare the maps. If there radically different I would say the turbo is limited

I'm in talks with nengun who supplied it and they are going to talk to HKS about it. ATM I'm putting no blame on nengun as they just passed on HKS information. So will see what they come back with

On holidays next week so car can wait for now.

You've probably got a massive boost leak somewhere... I'd say the stainless intercooler piping that you got someone to weld for you...

The tune is pretty damn good and there is nothing else I can think of that could restrict the power output. It's still not a bad figure, though. Every step forwards is a step towards a goal.

I'd say it was the turbo as well... What's your timing like?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...