Jump to content
SAU Community

Recommended Posts

Dan,

thanks for your reply about the CAS... That helps answer the question big time!

Also, I have just loaded up the haltech software on my work pc, coil dwell time can be set between 0.2ms right up to 20ms.

....

This is 'tested' on Version 1.11.1 of ECU Manager.

I know they are constantly adding new things to the software + ecu's with each update.... so it may have not always been in there.

post-49724-0-37608100-1352433077_thumb.png

Standard dwell on left, max on right for illustration purposes.

Using a R32 / R33 Platinum Pro base map to work off

Yeah you can set dwell time but can only choose one figure for the entire rev range.

In something like a Wolf V550 you can set coil charge time over RPM and also over battery voltage. It has a full tuning table for both at 125RPM intervals

Quick voltage vs rpm for ign. dwell.

Obviously not as detailed down to every ~125rpm or there abouts as some ecu's can do but it's still able to do same basis.

I should probably have gone a bit further than using single axis of RPM and moved into the full map to cover more values.

edit - stupid me not attaching. fixed.

post-49724-0-88270600-1352434206_thumb.png

Edited by Force Fed

As per text mate. Am happy to see if i can find anything else that may have been added since yourself / Sean had a look. :)

At least they are bringing out new "features" on same hardware!

You got a promotion, Nick? From auto-sparky to car assembly? Haha.

At least you've got a project to work on.

im auto lek/mechanic now man... once i finish this car and finish building these new ones ill be into the workshop full time. instead of goin from 1 side to the other

Everyone should stop talking about finishing their cars off and actually do it :)

I want to do some more photo's

Edit.jpg

Took the fitting out of the filter/cooler housing on my block today, going to go chasing a replacement male to male fitting for it on monday for my oil cooler. Was going to relocate the filter but have decided I don't really need to and dont really have the room

Am thinking about doing a catch can setup but. just deciding on how to do it

umm autobarn actually sell some decent quality parts... and the price isnt even that bad (depending on what u buy)

doesnt matter what shop it is. its not nice seeing it go up in flames. specially when 4 little cun7s lit it up

Yeah jokes aside its not real cool at all, the fact that it was young girls setting fire to a toy shop a few weeks from christmas makes it pretty horrible

When I was 12 I never would have dreamt of doing that, Parenting these days has taken a slide for the worst

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...