Jump to content
SAU Community

Recommended Posts

Ordered a new TPS today, no good news so far about my dodgy Power FC, so hopefully that might help

Dont know what to do with this Power FC really, I'd be really pissed if I bought another one and it did the same thing.

Ordered a new TPS today, no good news so far about my dodgy Power FC, so hopefully that might help

Dont know what to do with this Power FC really, I'd be really pissed if I bought another one and it did the same thing.

You really need to come and see me, I'll hook my gear up and have a look for you. I owe you a favour.

You really need to come and see me, I'll hook my gear up and have a look for you. I owe you a favour.

Its over in Perth at DMS Electrics (FC-Hako) with them looking at it. But so far They seem to think its something to do with the actual program and not an 'issue'

I'm not sure what other programs you might have that will go any further into the Power FC? I have FC-Pro and have logs of what it is doing, and the only thing that is different between my 2 power FC's is the ignition timing. There is a small spike in TPS voltage at the point where timing goes from 10 degrees retarded to normal IGN timing, but its 5mV.

I think they are going to send me over there V5.11 Power FC to see if I have any luck with it. If it works fine then I think they were willing to do a swap

I'm not to sure apart from that, do you have any other programs for the Power FC? I dont have it on me at the moment however

I just use to FC-Datalogit software.

If its not the program, I can actually have a look if it is something else. I've lost count on how many Powerfcs I've tuned. Ran into and fixed all sorts of problems. Another brain always helps in trouble shooting.

I can't really mack much of that out because I can't see the colours well. But anyway, if you need another brain, let me know and I will organise a time to catch up.

On another note, Benny, you might like this:

has just posted a new topic entitled "Nissan 200Sx - 4X4 - Rb30Det." in forum "RB30 conversions".

----------------------------------------------------------------------

Hi all.

Anybody interested in following my build?

I have an old S13, converted to RB30DET, and currently is being converted to 4x4 using different nissan parts, and custom work. Parts used comes from R32/R33/Z32.

All work is done in my parents garage with the car on jacks.

(
)

Yeah it didn't quite convert real well. At the moment they are telling me to check my AFM as the engine load looks a little erratic. Haven't had time to compare my logs to theirs fully but will play with it when I get the unit back

Sooooo block and girdle have to go to get the crank tunnel looked at now. It's looking up on Number 2 main. Not real happy, This engine is turning into a pain in the ass. Hopefully its not going to cost much if it has to be tunnel bored.

Yeah lol, hey Benny i replied to your message on FB but can u reply on here? I can't use my data on my phone anymore i've gone over my allowance thingy and don't want to pay the fee lol.

Need to know what winch you want, if you want tyres with the rims and what your contact number is so i can get the boys next door to call you.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...