Jump to content
SAU Community

Recommended Posts

my bro has tein super streets in his r33, i have buddy club N+ in my r34.

I have to say i prefer the buddy club, just the overall ride and feel.

Also, for anyone that is interested in really slamming their cars, teins height adjustmant is NOWHERE near as good as the buddy clubs. My bro has his on the lowest setting on the teins and its only just lower enough for my likings, my wheels are in my guards and i could lower it another 5 inchs if i wanted haha

  • 3 weeks later...

Hi to all my name is Dave i am relatively new to the forum i own a R32 GTR and have enjoyed all the feedback you guys have given each other i am looking to replace my factory gtr shocks etc with some coilover units and have been told that the TEIN FLEX are a great imbetween coil over for street and track use and have alot of ride height adjustment.

Does anyone here have any feedback on these and what are they comparable to the buddy range if possible please.

Cheers,

Dave.

  • 3 weeks later...

Dave I've heard nothing but good things from the Tein Flex. It's old now though and will be (if not already) discontinued I think, being replaced by the newer Monoflex.

The Tein Flex is more on par with Buddy club's Racing Spec Damper but it's more expensive. Buddy club's N+ is more in line with Tein Super Streets but has all the features of the Tein Flex and it's also cheaper than the Super Streets and a lot cheaper than the Flex. Since Buddy club is in Australia now, you get a 2 year replacement warranty which means that if you were to break your suspension, they would replace it (ie: not just fix it).

If you were going to make a track beast I'd go the Buddy club Racing Spec Damper or Tein Super Racing or Tein RA (also now discontinued). If you want to keep it fine on the street, but also great fo rthe occassional track day I'd go with either the Buddy club N+ or Tein Monoflex (Or old Tein Flex) but I'd not even consider the Super Streets as they're just too soft (in my opinion of-course) for the R32 GT-R.

PS: I run Tein RS on my GT-R. I did have the complete Whiteline Works package on there before, with Bilsteins and adjustable sways, and found the whole Whiteline set-up ridiculously crap!!! Too hard on street (just was not right, rebound was all wrong) and way too soft for track?!

Edited by justinfox

Rather then look at different brands, i would ask what dollars do you have to spend. I kind of think that good suspension is good suspension, whether your car is for the street of for the track. Unless you run slicks and have a very stiff chassis then i dont think you really need to run the sort of spring rate that will maek the car horrible on the street. Thing is you need to be sure the shocks can handle the spring you throw at them. A friend has Ohlins with very high spring rates in them and the thing drives veru nicely on inner Melbourne streets.

Liek anything, rather then realying on the opinion of forum members, get your bum into as many cars as you can and sample as many different suspension setups as possible. You may like what others dont like...and vice versa

Cant use EDFC on the Buddyclub can you? :) haha

Ive been wondering what to choose for my R33 since before i got it!

Think after reading this ill go for the buddyclub.

Undecided on if i will go for the N+ ir the Racing Spec Damper... I like a bit of track use.. and like Aus, NZ roads are god dam hopeless with hard spring rates.

  • 2 weeks later...

Buddy Club and TEIN are getting top marks in this thread, but how do some of the other makes compare??

Such as GReddy? HKS? D2? Koni? Has anyone got these on their Skylines and are they much chop??

Buddy Club and TEIN are getting top marks in this thread, but how do some of the other makes compare??

Such as GReddy? HKS? D2? Koni? Has anyone got these on their Skylines and are they much chop??

Nearly everyone i know with D2's in any car complain that the spring rates are faaaaar to hard. Especially on Aus and NZ roads

  • 1 year later...

Sorry for bringing up an old thread. My front R-Tunes are totally wacked though no oil leak but has a lot of noises.

Someone pointed to this BC Racing suspension from Taiwan. Since they have a dealer not far from where im at, hope for some feedback from any forumers who has tried them on a R34GTT. If you google it, there is quite a number of forum website that gave some good reviews especially the Subaru's. The are bang for buck suspension setup.

http://www.bc-racing.co.uk/

http://www.bcec.com.tw/index.htm

either BC or Tein cant go wrong i think. Bang for buck, BC. Where can i buy buddy club N+ in WA or to WA? importmonster have the junior spec for 34s for $2309 to WA.. anyone know anything about this junior spec?

Damn $2309, f**k I paid $935. Brand spanking new and let me tell you they are awesome, I've been running on them for almost 3 months with plenty of everyday street drive, also plenty of weekend drift and or wangan(top speed runs) action to and they are solid performers.

They do not tend to get sluggish after plenty of hard drive due to their single tube construction, compared to the twin tube design and also no matter how low you set the stance you do not loose you full shock travel.

Plenty of my friends over here in Japan are using the JuniorSpecs and are very satisfied using them in a wide range of vehicles: JZX's, S14's,S15's, FD's, R32's, R33's, R34's, ETC.

any other info on where to buy BC Junior Spec besides suggesting an upgraded rev limiter?

Nengun doing $2,132.59 for ER34 delivered.

Bee*R is the name of the tuning shop and they sale more than the rev limiter.

The BC Racing has 2 models for the R34GTT, V1 and the BR. Go for the BR which is a newer model & design. Since Im from Malaysia, the closest dealer is in Singapore and the price i got quoted for is around USD 900. This is the closest thing to compare with the Tein Monoflex but has height adjustment without effecting the spring tension which is what i like. Happy that some one has tried & tested it on a Skyline. Will give it a go as I have enough of bumpy ride and confusing height adjustment setup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...