Jump to content
SAU Community

Recommended Posts

Wanted to buy

Nissan stock intercooler piping in 2.25in

Stock inlet pipe to suit rb20 turbo

2nd hand r33 turbo, must be cheap and usable

Starter alternator wiring loom to suit rb20

Swaybar saddles and bushes any cond to suit s13

WTB Z32 Stock ECU , the 8 bit ECU would be most desirale. Can be any JDM , EDM or

1990-1992 USDM model ECU. It does not matter if the ECU is naturally aspirated or turbo,

manual or auto. (Nissan part numbers 23710-30Pxx, 31Pxx, 37Pxx, 40Pxx, 41Pxx, 46Pxx,

47Pxx and 48Pxx).

WTB Z32 Stock ECU , the 8 bit ECU would be most desirale. Can be any JDM , EDM or 1990-1992 USDM model ECU. It does not matter if the ECU is naturally aspirated or turbo, manual or auto. (Nissan part numbers 23710-30Pxx, 31Pxx, 37Pxx, 40Pxx, 41Pxx, 46Pxx, 47Pxx and 48Pxx).

Cancel that, scored A18-A72 MB6 91 300ZX (late) N M F Z32-VG30DE 23710-30P60 from ebay USA for $30 ..... thats only $300 cheaper than Japco and $240 cheaper than Japanese Import Spares, Adelaide Z cars and Nisswreck.. :-)

Rb26 long motor in good condition or rebuilt.

rb26 boost control soleniod

thanks

Rb26 long motor in good condition or rebuilt.

rb26 boost control soleniod

thanks

Hey mate have one for sale, give me a call on 0403431194, rb26 long out of a r32 GTR.

DSC02471.jpg

DSC02470.jpg

150,000 km after $2400. Removed turbos etc already and injectors. Everything else is there.

Comp test

Edited by GTR1993

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...