Jump to content
SAU Community

Recommended Posts

My baby (S1 '97 Stagea 25X RS Four) has developed a rawther distressing noise and I am really hoping someone out there will have some ideas.

When the gearbox is under load, there is a rattle coming from the top of the gearbox/centre diff that sounds a bit like a loose bit of plastic or something, but it is coming from under the shifter console. Before anyone asks, yes I am sure it isn't just a loose bit of plastic. I had a similar sound in an old falcon once and it turned out to be the speedo drive working its way out of its retaining bush in the gearbox, but isn't the speedo in these things electronic?

The noise is only apparent when the gearbox is under any load (accelerating or maintaining constant speed) and it is getting louder everytime I drive it.

Another thing it is doing, and I don't know if this is related or not, is there is a slight "shudder" apparent at low speed and constant speeds

I have only had the car a week and a half and I am really glad I chickened out of a personal import because at least I have a warranty, but I still want to hear any opinions.

HEEEEELLLPPP!

Link to comment
https://www.sau.com.au/forums/topic/146839-gearbox-centre-diff-problem/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

SILLY QUESTION TIME - (HENCE THE HANDLE)

If there is no centre diff, what in the hell is the massive lump for in the floor on the passenger front side for? I just assumed it was a centre diff. Front transfer case maybe?

Also, to confirm, trans fluid should be checked with engine on and gearbox warmed up? if so, then I have the right fluid levels, but as I said, I have only had the car for a week and a half and I think I would have noticed if there was a massive leak by now.

Next question - how seperated is the gearbox and the ATTESSA system? Is there any way one could leak fluid into the pther?

in the R32 (dont know about stags) theres a ATTESSA fluid container in the boot.

Yep sure does, how do I check the gear box level? Can't find a dip stick where I would expect to... :)

Yep sure does, how do I check the gear box level? Can't find a dip stick where I would expect to... :laugh:

from memory i think my mech cheked it where we pour the oil in. May i suggest that you migh want to pour in a bottle of the auto transmission additive made by nulon. you will notice substantial differences. This is just an option/

from memory i think my mech cheked it where we pour the oil in. May i suggest that you migh want to pour in a bottle of the auto transmission additive made by nulon. you will notice substantial differences. This is just an option/

Yudy, you have a 5 speed manual 260RS! I have an auto, they are very different...

My car has the shudder in the transmission at constant speed. It felt like a failing uni joint at first, (count how many there are of them under there!!). I noticed the shudder was there when sitting at the lights in D and it dissapears when in N. It can be made to dissapear by backing off and coasting. Another symptom I have is when giving the car a bootful from a 15km curve that climbs out of a gorge. If I do this on a hot day it turns the 4WD light on and goes into 2WD.

My first check was for the level of the ATTESSA system. This can be found in the back on the right hand side behind the little door. This should be checked when the ignition is on and the ATTESSA pump running and probably on level ground.

My second check was to bleed any air out of the pump and transmission. This is done via a pair of little bleed nipples when the pump is running. One is above the diff (hard to see at first but it is there). The second is just at the back of the transmission housing. There was a fair amount of air in there.

My third check was the transmission fluid level. This is done after the transmission is warmed up, in N, on level ground and idling. It is checked with the dipstick on the firewall.

None of these things have fixed the problem.

My next move is to replace the transmission fluid and filter, and replace the ATTESSA fluid by bleeding the fresh fluid through as it had muck in it.

I believe the transfer case has its own sump. I have to investigate how to refresh it's oil.

The oils to use can be found in the maintenance or parts section in this very forum.

Yep sure does, how do I check the gear box level? Can't find a dip stick where I would expect to... :happy:

Dude - it is buried behind the rocker cover just slightly toward the drivers side, hard up against the firewall. It took me 10 minutes of searching before my wife came out, pointed straight at it and batted her eyelids at me....

:P

just some advice about the 4wd attessa setups. the container in the boot area for the attessa is only for the pump it does not show the level of the fluid in the actual transfer case itself, to check the TF case level u need to jack car up so its level and get under and pull the filler plug out (top one of the 2), its on the very rear of the gearbox (its actually on the TF case but the tf case is on the rear of the box).

use auto tranny fluid for the transfer case, Nissan have Matic D or castrol make a new synthetic one called Transmax or something like that from memory.

use auto tranny fluid for the transfer case, Nissan have Matic D or castrol make a new synthetic one called Transmax or something like that from memory.

would this apply to auto stageas only? or would it also be applicable in manuals???

just curious cos i am looking at doing a fluid purge right thru the car soon including brake fluid etc.

would this apply to auto stageas only? or would it also be applicable in manuals???

just curious cos i am looking at doing a fluid purge right thru the car soon including brake fluid etc.

both manual and auto stageas use auto fluid in the TF case :happy: also the transfer case fluid is totally seperate to the gearbox fluid.

would this apply to auto stageas only? or would it also be applicable in manuals???

just curious cos i am looking at doing a fluid purge right thru the car soon including brake fluid etc.

For the love of all that is good and holy DO NOT PUT ATF FLUID IN A MANUAL GEARBOX!!!!!!

You need to put gear oil in it. There are some excellent synthetic gear oils about but if you put auto tranny fluid in a manual, you will destroy your gearbox in very short order

i kinda figured you wouldn put atf in the manual box but was told to also use normal gear oil in the transfer too? so will hafta check this out a little further with the local skyline guru.

sorry - mybad, I should have realised you wouldn't be that dumb. :happy:

I have had a mate that put 14 litres of engine oil in to his Mazda 626 - when asked why, he said it was because he looked down the filler hole and couldn't see the oil level so he just kept adding.

And yes, the engine did "hydraulic" and stick a con rod thru the block (chortle)

Edited by newbie101

heres a post i found when doing a search for oxford...

This may or may not be useful - straight out of the Australian delivered GTR32 owner's manual:

Recommended lubricants:

Fuel: Premium unleaded - min octane 95 RON

Engine: API SG 7.5-30 Turbo

Manual transmission: API GL-4 80W-90

Transfer case: Nissan Matic "D"

Power Steering Rack: Dexron II

Cooling System: Nissan LLC (long life coolant)

Brake and Clutch: DOT 4

http://www.skylinesaustralia.com/forums/in...c=58968&hl=

read the whole thread as plenty of knowledgable users have said use "matic D" or regular ATF fluid is fine.

this is castrols reccomendations...

Engine Castrol formula R 10/60

Gearbox Syntrans 75w/85

Transfer case Transmax Z

Front Diff Syntrax 75w/90

Rear diff SAF-XA 80W-140

4wd TRANSMAX Z

pwr steer TRANSMAX Z

Brake super response dot 4

Clutch super response dot 4

Edited by CruiseLiner
Yudy, you have a 5 speed manual 260RS! I have an auto, they are very different...

Alex my 4wd lancruiser is an auto i tried the nulon additive on the auto gearbox and it made a HUGE difference in shifting ETC. try it you wont regret it

Also i think i posted lists of oils lubricants remmended by mobil too. Cant remember where i posted it up at though soz. Its what i wass recommended by mobil when i purchase all the oils from them.

Edited by stasis

I have the same problem with shuddering at constant speeds, but my car is getting serviced on thursday, and im getting my new tranny cooler fitted so the tranny fluid will be replaced so i guess ill see how i go.

But ill let you all go

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
×
×
  • Create New...