Jump to content
SAU Community

Recommended Posts

Are we so sure that this wasn't a pre-existing condition? I feel that any stronger pressure plate would've brought this fault to the fore?

yeah agreed that any combo of stock (or even worse standard lightened) flywheel combined with a pressure plate high higer clamping, and a more agressive compound friction plate is a bad idea. it's not a problem limited to JB clutches, it's just that 2 very big failures were using them, and a lot of the kits he does seem to re-use the standard flywheel. By all account his clutch kits sound good, but I'd advise on insisting on a new flywheel that's all.

I need a new clutch soon, it sounds like someone threw a bolt in mine :P, I get this light rattling sound while pulling off out of first....Anyway.

I was thinking about a Nismo Super Coppermix Twin Plate which will cost me about $1800-$1900 from Japan and can handle 670ps. Is it worth just getting a JB single for a grand-ish instead?

I may get a new fly too.

I've recently being through the process of getting a new clutch when rebuilding my engine, having a hks twin plate and then a exedy button style.

I considered the jim berry special but went for the new exedy range costing 2500 and its great to suit a 500rwhp gtr

on the other hand my mate with a very fast evo spent a third of that with jim and his clutch seems nice and feels stock as

HKS/Nismo = makes everything for every car

Jim Berry = exclusively makes clutches and has done for close to 30 years

That's the difference. I don't understand why people feel the need to buy a brand name component when it isn't polished, annodised or billet and you'd never see it if it was :P

Not to mention the level of detail jim spends on making sure the clutch is just right. I mean when i was there picking up a new one, he put the pucks on infront of me, and he measures and sorts out the different thicknesses, and tripple checks the clutch for true level.

I was quite impressed :P

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...