Jump to content
SAU Community

Recommended Posts

bleh, sif it makes a difference, i have a friend who's father has a 700odd hp twin turbo v8 supra using a just jap intercooler, runs fine no worries.

Its all marketing hype, admitadely, $2000+ inter cooler kits fit better and thats about it.

cheers

I've got one, but haven't installed yet... don't know if i will either. The only time I give my car stik is at night and the air is cool enough already.

The highest knock level I have had at night has been 17 which is nothing. However if you're stupid and crusify your car during a hot day it would benefit your cause a little.

If your car is completly stock the intercooler will make it slower due to the extra meter of piping and the huge volume of the intercooler that has to be filled with boost.

A FMIC will make your car look faster, besides that at this level of performance any el-cheapo or brand name cooler will cool effectively enough for your needs. So yes, they work good.

Which cooler is it? bar and plate or tube and fin? Either way though i've seen these coolers support in excess of 260rwkw so they can't be bad...alot of brand snobs would say otherwise but results speak for themselves...and its usually the piping that lets you down...cheers...

Which cooler is it? bar and plate or tube and fin? Either way though i've seen these coolers support in excess of 260rwkw so they can't be bad...alot of brand snobs would say otherwise but results speak for themselves...and its usually the piping that lets you down...cheers...

I bought a hybrid copy kit that came with a delta fin core, its basically a APEXI intercooler copy.

The isntall was not exactly a easy botl on but its all together is fairly good. I f could do it agian i would have saved the money and bought the blitz style that uses the stock IC pipes off the turbo and in the intake. I personally dont liek the ider of the hybirs kit with a pipe running across inbetween my radiator and engine then having to cut my fan blades not to mention make a 3inch hoel in the side of the car for the pipe.

Other wise for the money great kit. I have the Bar and plate before and apparently the Delta fin is supposed to be better and cost more. Ohnestly for a street car under 150 rWK i doubt id notice the difference?

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
×
×
  • Create New...