Jump to content
SAU Community

Rb25 Non Turbo Engine Plus Other Parts...

Chessa
 Share

Recommended Posts

Chessa Collaborator

Chessa

Posted
Posted (edited)

STILL HAVE THIS STUFF FOR SALE...

An RB25 non-turbo GTS engine - good condition, has done just over 90,000km's. Also the ECU and wiring loom. Includes things like the alternator, hoses, clutch etc etc... Selling for $1000 $800

A GTS-t gearbox, manual, for the turbo R33. The bloke that owned it before me put it in there because he was going to put a turbo engine in the car but didn't get around to it. It is in reasonable condition... Selling for $1000 - SOLD!

Will sell above items for a set at $2000...

Plus all the other little goodies that get moved around such as:

FROM THE NON-TURBO: Series 1

Fan shroud $40

Instrument cluster (non-turbo), reads around 90000kms $80 SOLD for $85 incl postage

Radiator Hoses $5 each

Starter motor $70

Air conditioning compressor SOLD $80

Clutch, Brake and Accelerator Pedals $90 set or can separate

Air box $30

Air Flow Meter $90 SOLD for $80

Electric fan (for air conditioning) $60

ECU and Wiring Loom SOLD for $170 incl postage

4 Stud Hubs, Calipers and rotors for all wheels $ Make an offer

Make an offer on 3 16"rims - only 3 as one is cactus

FROM THE TURBO: Series 2

Fuse boxes $20

Gearstick Sorround, Slightly damaged material, no ashtray $10 - SOLD

Front Control arms $50 each

Dash board $50 - has scratches and one damaged air vent - just needs a clean

Dash surround (goes around climate control unit/CD Player etc) $50 - SOLD

Air conditioning condenser $100 - SOLD

Heater unit (assuming thats what it is called - behind dash, big white thing) $80

Support brace (assuming its called that - metal brace behind dash that goes across width of car) $20

Climate control unit $100 - SOLD

Steering Column $100 - SOLD

Door hinges $5 each

Bonnet hinges $5 each

ABS Unit $80

Other kick panels etc $20 each

Air snorkel $20 - SOLD!

Heater hoses and stuff like that $5 each

Also, many other little bits you might find in a half-cut (centre console forward). If you are after anything I haven't listed or want a picture of anything let me know so I can take some photos and send them to your e-mail or something...

Pictures at:

For the engine:

http://s135.photobucket.com/albums/q128/Chessa87/Engine/

For other spares:

http://s135.photobucket.com/albums/q128/Chessa87/

Edited by Chessa
  • 2 weeks later...
Chessa Collaborator

Chessa

Posted
  • Author
Posted

For the guy who contacted me earlier last week, send me a PM and we can work something out with the engine etc. If need be I can take it to Sydney if you can get someone to pick it up from there.

MBS206 Grand Master

MBS206

Posted
Posted

On the dash of the GTS-t, there are some little vents (Up the top of the dash) that are used to aim at the side windows when on "Window" for fan etc.

Also the A-Pillar plastic bits.

How much each? (Mainly want the drivers side A-Pillar plastic)

Might be able to pick them up tomorrow.

  • 2 weeks later...
Chessa Collaborator

Chessa

Posted
  • Author
Posted (edited)

I am located in Nowra, NSW. About an hour south of Wollongong.

Really would prefer not to pull apart the engine, will drop the pirce to $900 without loom and ECU

Edited by Chessa
Simon-S14 Grand Master

Simon-S14

Posted
Posted

you've already started pulling parts off it?

Whats left on the motor? Im interested in it, dont need an ECU, just motor and loom but price depends on whats left on it. Not willing to pay the asking price of 900 if its missing stuff.

cheers

Simon

  • 4 weeks later...
Chessa Collaborator

Chessa

Posted
  • Author
Posted
do you have an ecu loom for the series 2?

Hey

The one from the Series 2 turbo got pulled out and put into my car when I did the conversion. I sold the loom for the non-turbo also. Sorry I can't help you out.

  • 2 weeks later...
  • 5 weeks later...
  • 1 month later...
Chessa Collaborator

Chessa

Posted
  • Author
Posted

UPDATE:

Had an accident so now only have 3 good rims, will take any reasonable offer to get even 2 off my hands. Comes with tyres.

All calipers, hubs and discs off my GTS are now up for sale - finally completed the brake conversion. Will separate. Make an offer!!

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...