Jump to content
SAU Community

Recommended Posts

Me and my mate(he owns a 94 supra) have been arguing over which is quicker, the Supra or the R32 GTR.

I told him the best R32 GTR would kill the best Supra any day becuase it is lighter and the fact that the Skyline is the most tunable car ever. So he shows me some you tube video of some 8 second Supra.

What do you guys think..which is quicker quarter mile? If you have some proof it would be good as he never takes my word for it.

8 Second supra video -

7.92 R32 GTR clip -

Edited by pablo101
Link to comment
https://www.sau.com.au/forums/topic/150165-supra-vs-r32-gtr/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

it was more like a intraweb fight............

anyways im heading down to nissan to pick up an oil filter, anyone need anything while im down there?

crap.. that reminds me i gotta do an oil change too.. thanks for remindin me...

whats the quickest RB powered car anyone knows of? Reece's GTR? quickest supra i know of is about 7.9, but have seen 2JZ's in the sixes....

I too wonder what the quickest rb powered car is, im pretty sure there is a full tube (or could just be tubbed) 350z in the states using a rb26 doing low 7's or high 6's,there was a article about it in one of the old SPEED magazines i 'think', correct me if im wrong about those times please lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...