Jump to content
SAU Community

Recommended Posts

http://www.pickles.com.au/servlet/Auction/...em_id=252053789

Was looking at getting this car and repairing it.

Do you guys think it would be worth it?

I'm looking to get a cheap car, and i was thinking that i could get a newer car that was damaged and i could repair it, thus making it cheaper than if i was to buy it in good condition.

If you think it's worth buying and repairing, what do you think would be a reasonable purchase price??

And what would be you guys estimate on repairs?? (also read the damage details on the site to give you a better idea)

Cheers

Link to comment
https://www.sau.com.au/forums/topic/150947-opinions-on-this-wreck/
Share on other sites

If you got the wreck FOR FREE it still wouldn't come close to a "cheap" repair bill.

I've worked in damaged-auction yards in the past & as soon as you see Heavy Structural in the damage listings it's usually only viable if you own a shop with all the equipment & can do it all yourself. To pay to have the work done would be prohibitive- remember it was written-off in the first place for a reason.

I've even processed vehicles that had VERY minimal panel damage that were financial write-offs purely based on the cost of replacing the air-bags etc. Worth a look maybe, but I'm guessing it would only end in tears.....

This car is good for parts only i reckon. I wonder how much it would go for. i could use alot out of it to sti spec mine lol. when it going on auction i cant find the auction time anywhere

Dont worry found it 16/01/07

How about import one from Japan and use this one registration plate?

NO that's illegal mr west.

plus you'll not get one into the country without a CAMS L3

on a side note, see all those nice pink arrows? a repairer has gone over it and marked where the body has moved... looks like the whole shell is twisted in the direction of the arrows

NO that's illegal mr west.

plus you'll not get one into the country without a CAMS L3

on a side note, see all those nice pink arrows? a repairer has gone over it and marked where the body has moved... looks like the whole shell is twisted in the direction of the arrows

Holy shit. My bad.

Only coz i see lots of EVOIII registered them self as Lancers then Engineer to be Evo's.

There's no info on whether it's a repairable write-off or a statutory write-off.

Before you even think about buying it, find out which it is.

I don't think you'd be too happy if you purchased a car to repair, then found out that you've just purchased a statutory write-off.

i think it will only be good for parts. u could always upgrade a normal RS to sti spec with parts from this. as far as wests swap, i think every state has different laws but most now will not let similar happen and have changed or brought new laws in to stop things like that. but i think it could still happen but lets hope u dont get caught driving a car like that or sell it

well the car is a repairable write off, it says that in the catalogue before you enter that page.

I know that it would not be worth repairing, but does anyone have any idea of the price for repairs?

Im guessing 10k+

well the car is a repairable write off, it says that in the catalogue before you enter that page.

um...

from the index page:

CP 09/05, SUBARU, IMPREZA, S MY05 WRX STi, Sedan, 5 Seats

MANUAL, 2.0 ltr, 4 cyl, Premium ULP, Multi-Point Injected Turbo intercooled, 0 kms (Showing On Odometer), BLACK, Rego.No:NP(TTC115), Aircond., Airbag Dual, P/Steer, P/Wind, IRS, Cru. Cont, Cent.Lock, CD Stacker, CD Player, Radio, Immobiliser (App), Body Kit, Double Glazed, DVD, Rear Spoiler, Turbo, custom wheels (Stock No. 3131897), GST Included in Sale Price

I don't see anything there about whether it's repairable or not.

i think it will only be good for parts. u could always upgrade a normal RS to sti spec with parts from this. as far as wests swap, i think every state has different laws but most now will not let similar happen and have changed or brought new laws in to stop things like that. but i think it could still happen but lets hope u dont get caught driving a car like that or sell it

damn right it does happen...

it's called stolen cars and rebirths!

step 1. acquire 'repairable right-off' or statutory right off

step 2. acquire* perfect vehicle that is the same, but not banana'd

step 3. remove and swap plates

step 4. present to relevant government registration body for re-registration

step 5. sell for mucho cashola

*may be acquired by non-legal means

thankfully data-dot technology is starting to make this more difficult; stolen cars tend to end up in parts rather than rebirthed. If only they sold data dot paint to general consumers so i could unleash it all over my car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
×
×
  • Create New...