Jump to content
SAU Community

Recommended Posts

Not banned though. Group A class was binned worldwide due to spiralling costs and regions went their own way resulting in V8SC and the less successful Super Tourers here so no class to race a GTR.

"spiralling costs" that makes me laugh,seing how im pretty sure its like $150k just for an engine now and the cars cost like a 1mil each. correct me if im wrong. i think for the reason it is still only v8s in 2007 .not cost but its all about marketing the aussie product. which is fine but everytime i walk past a hsv shp or im in target or kmart e.t.c. the only motoracing merchandise they sell is v8 bloody supercars! and they are still running 5 litre donks??/ my old man used to take me to see the sierras ,skylines rx7s back when it was group a and it was a lot more entertaining than watching a v8 ford or a v8 holden boring.....my 2 cents

yeah, i remember watching the tapes of grp a.

so entertaining! loved every minute of it!

i can barely sit through a few minutes of a V8SC round before i get bored and go do something else. like sleep.

the 2 horse race thing is getting really, really old.

carl that's just the result of rule changes and a strong economy. It was initially relatively cheap.

I personally would love to see more makes, so that is why i watch speedweek and plan on getting to more rounds of different race series. Without investment and patronage the others stay small while V8s are still seen by the dumbarse general population as the only game in town.

carl that's just the result of rule changes and a strong economy. It was initially relatively cheap.

I personally would love to see more makes, so that is why i watch speedweek and plan on getting to more rounds of different race series. Without investment and patronage the others stay small while V8s are still seen by the dumbarse general population as the only game in town.

the main reason the dumbasses follow the v's is because they think holden and falcon are australian (cough cough)

funny how they all use american design motor (chev) or canadian design motor (ford)

so much for being an aussie car lol

Could always pull this right off topic and discuss how they both have Ford diffs etc.....

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

im gunna be a bogan and echo some crap :unsure:

Yeah '92 was the last year of the GTRs, not because they were winning (lol) but because it was also the last year of the group As.

Bit of controversy over the win tho in '92. With a shagged car winning. And one thing i love to point out to holden fans... Skaify drove and won bathursts in a nissan lol

If your real keen there were some vids on here a while ago of the 91 and 92 bathursts with the gtrs. you could have a look and see if they are still up. or i could send them to you for a small fee to cover postage n shiz :huh:

.

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

iagree the days of the gtho and monaro and gtr torries were awesome

they even had volvo's racing back then

the old days of drive to the track ... race ... and then drive it home if it was still going

win on sunday sell on monday has no meaning with tthe way the v8's are run these days

Could always pull this right off topic and discuss how they both have Ford diffs etc.....

No I'd like to see a return to using basically showroom (not "homologated") components for engine, gearbox and running gear with brakes, ecu and suspension relatively free but must use original mounting points.

Well the rear ends in the V8's are only very tenuously linked to the Ford 9" diff. There has been (Like every component in the cars) an awful lot of engineering put into them. If you take a look at the detail work of the diffs in the car you can see why Ron Harrop & the like earn their money.

There are plenty of showroom series out there. Unfortunately the history of showroom class racing is a litany of cheating when done at the top level.

There are plenty of showroom series out there. Unfortunately the history of showroom class racing is a litany of cheating when done at the top level.

Simple, every car can be sold after every race in a lottery of people who want the car for the RRP.

Do they have the full race though?

A single race should be the full length of the dvd.

I've got one where they have squeezed 3 on to one disk and basically it sucks. They have chopped out that much its not funny. I've got 3 full 1990-1992 vids BUT they are poorish quality (DivX 320x240 vhs copy), none the less they still look ok on a 68cm tv, computer screen they look horrid.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...