Jump to content
SAU Community

Recommended Posts

Dont know if anyone here just saw ten news, but it showed an 18 year old man, who went into court for offences such as driving without a supervising driver (he was on his learners).

The police are trying to get his car permanently impounded.

He also led police through a high speed chase a few months ago.

He was going 120kph through residential streets, with police eventually calling off the chase when it got to speeds of over 160kph.

His car was a black (or was it midnight purple) R33 Gts-t with the plates MRGTST

If you're on this forum, i hope you car gets impounded, maybe that will teach you to be a d!ckhead on public roads.

Its c@nts like you that give the whole scene a bad name.

Hope this doesn't effect and liners out there, even though it probably will.

That's all i have to say.

don't mean to sound like an ass...

but this is getting too annoying, everytime someone does something illegal on public roads and gets cought etc its always "you moron thanks for making the rest of us look bad etc etc etc etc"

he got cought and he's obviously paying for it so just get over it.

it's nothing new it's always been like this why does it surprise you?

behave, do your part and stop bitching about what others do.

sheeeesh

again, don't mean to sound rude...

Edited by R-SPEC

Yeah I saw that on 7 news a minute ago. No matter what anyone says you cant justify being caught 7 times in 16 days for offences on your L's unless you are a total di(khead. So thanks Mark Russel for bringing more heat to out scene.

On a positive note i'm currently looking for a black 33 so I'll keep my eyes peeled for it at the police auctions!

Edited by stolen_s15

Yeah saw it just then as well. I agree that its completely stupid what he did, but really who really cares anymore about having people look down on skylines now. Seriously between noble park and hoons and skylines and everything else whats the point of having a winge about it anymore ^^^!

Own a skyline, drive it how you like, be prepared to get caught and accept punishment. Simple as that.

Yeah look its all blah blah blah. No point in complaining. People will make up their own minds about Skyline drivers and looks like many already have.

Convince one person otherwise, fine, but people as a collective are stupid and naive and will have their minds made up for them, i.e by the media. *cough* ACA etc

Unfortunately anything we say falls on deaf ears.

Edited by Savage Bliss
don't mean to sound like an ass...

but this is getting too annoying, everytime someone does something illegal on public roads and gets cought etc its always "you moron thanks for making the rest of us look bad etc etc etc etc"

he got cought and he's obviously paying for it so just get over it.

it's nothing new it's always been like this why does it surprise you?

behave, do your part and stop bitching about what others do.

sheeeesh

again, don't mean to sound rude...

agreed. cops dont hear about it and go "ok things are now worse for skyline drivers"

f**k for years and years commodore drivers f**ked around on the roads and cops wouldnt go "be on the look out for commodore drivers"

Like the others said, the majority of liner's are mature & respect the roads, safety and the laws for good reason.

Everyone knows what can happen when abusing this.

I've cruised with the QLD fraternity recently and all were well behaved and drove sensibly.

When parked we saw 2 180's racing a 33 off the lights and someone could have been hurt in the process.

They're idots, most aren't.

The powers that be (ok, maybe with the exception of one in Melb) soon work out who to hassle and who to let be.

Just be good and enjoy/appreciate your rides, coz one day you'll have kids & drive a boring family car!

Edited by Mean_R34
this is gonna bring a lot of unwanted attention to u skyline drivers and the import scene in general

That is bullocks

What a beautiful R33 though.. If i was him right now, id hide the car somewhere good and claim it as a stolen!

0,,5365243,00.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...