Jump to content
SAU Community

Recommended Posts

1. Don't drive your skyline is one big tip.

2. use your mirrors wherever possible

3. obey street signals

4. stay 5 km below the limit, this takes into account hills (speeding is instant failure)

5. Head check when changing lanes

6. use the hand brake on hill strats not the clutch (3 stalls and you fail)

7. Remember don't hit the curb in parellel parking, pick your point and be confident.

8. be relaxed, if your nervous you will stuff up and be hard on yourself

9. if you are to tense or have had an unfortunate experience with another driver that has shaken you pull over and stop the vehicle. They do respect you for being responsible.

10. have fun and remain focused.

If you get stressed, thats when your likely to stuff it up.

Just relax a bit and you'll be fine.

Its really not as hard as you would think... i mean... when you see some of the drivers on the road these days, VicRoads must be giving out the plastic like hotcakes.

Don't you just have to send in 12 tokens from specially marked packs these days?

Anyhoo...

Concentrate, don't rush anything, use your mirrors, and relax.

Good luck!

LOL! Thought it was normally a promotion they ran where they were found free inside specially marked packs each year! :devil:

You definately dont want to be panicking as if you do, it will most likely show in your driving. Most people will suffer some nerves but try and keep them under control. If you fail, you fail. Take the advice on board given by the examiner and think of it as him/her trying to help you rather than you failing. :devil:

i agree, don't do it in the skyline, if u wheel, spin it the tiniest bit or the instructor doesn't fancy hoons, your probably screwed. It's not hard to get, i got mine with about 2 weeks practice and no paid lessons.. Hardest bit was the stupid computer test, that things retarded, so many things flying at you and buttons to tap

Yea I stuffed up the computer test, because the silly cow didn't tell me how it worked [ more like silly me for not askin]. If you don't know how to use it, ask. You won’t look stupid, and might save you having to resit it.

Don't let it stress you, there’s no point. Just pretend that no one is there. If you are confident and capable of performing all the maneuvers’ ect... with out the assessor, then you will be fine with him/her. If you are relay stressin your self about it, it might pay to get a paid lesson, and reassure your self. Bonus of a paid lesson is that the instructor knows all the routs that the assessors take you on, so you can learn the road that you will be taken on, and have no surprises

haha, yes the HPT is a freakin joke.

USE YOUR COMMON SENSE

Also, theres one where you waiting to turn right at an intersection on a green light, and your giving way to oncoming traffic whilst waiting in the interestection... so you get your cars and stuff, then a truck, and it looks like its all clear.. but it's not, theres a motorbike behind the truck... so watch out for that one...........

man that computer test still hasnt gotten any better i see, thats the worst, questions are multiple answeres like the learners, maybe still i took mine agers ago, heh

just dont stress, if your a confidant driver, and can actually drive there is nothing to worry about. I personally dont want a person behind the thats a nervous wreck, if you dont feel ready, reschedule.

Just, calm down, if you havent had any paid lessons best u do, as they will show u tricks, and teach u to drive how to pass the test, plus do a lesson before the test, i did, and it was the same route i took for the test, was a bonus.

If your from the s/e burbs goto the dandenong branch, apperently has easy routes with main roads and little traffic, i had mine in peak hour :( trucks n all. meh be confidant :)

if you make eye contact with the person next to you, you have to race them :(

That computer test was shocking, real lagging and past on 51% :)

95%+ on the actual driving test so go figure lol

Got into the car with tester. Told me to reverse out of carpark onto main road. I put it into reverse(not hard enuf) popped into neutral and started rolling forward :laugh: Also told me to turn right and started indicating left ~_~

After these 2 quick blunders, decided to relax at the next lights and went all good :(

If you go with a good learner instructor, they usually provide some notes about the test day. Here are some :)

OVERTAKING

You will be required to press the mouse button at the point you would overtake. Make sure there

is enough gap.

. You are following a tractor in the country with double lines on the road. Wait till you get to the

top where the lines change to single broken and you can see in the distance.

. You are following a bike in a small shopping strip. You can’t overtake, as there are oncoming

cars and cars pulling out of parking bays.

if you make eye contact with the person next to you, you have to race them :(

That computer test was shocking, real lagging and past on 51% :)

95%+ on the actual driving test so go figure lol

If you go with a good learner instructor, they usually provide some notes about the test day. Here are some :laugh:

OVERTAKING

You will be required to press the mouse button at the point you would overtake. Make sure there

is enough gap.

. You are following a tractor in the country with double lines on the road. Wait till you get to the

top where the lines change to single broken and you can see in the distance.

. You are following a bike in a small shopping strip. You can’t overtake, as there are oncoming

cars and cars pulling out of parking bays.

As you are saying this, does this mean it isnt taught ordinarilly? It seems logical to me and something I would adhere to in everyday driving. (BTW didnt sit my driving test here only a theory test)

Very simple dude.....

Impossible to fail!!!

Take your time don't speed, signal where required and don't hit anything and more importantly anyone :(...

And if you do happen to stall it don't stress have to do it 3 times to fail :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...