Jump to content
SAU Community

Recommended Posts

are you guys sure the r33 thermo fan doesnt switch on with aircon? i thought it did. not constantly, but as needed.

Yes you are right, even R32 but i think we'd like to have the fan turn on a bit earlier than what set (factory temp set at 94degree i believe) by Nissan just to be on the secure side.

  • 1 month later...
  • 4 weeks later...
Thanks for the how to Cubes, worked a trick. But I think its a little too late for my compressor, I think the summer period has over cooked it. Oh well I have a replacement one here.

What gas are you running? Our compressors are not designed to deal with the high pressures experienced with R134a gas.

Find an aircon specialist that is licensed to deal with R12a; a MUCH better option.

I've had both gases in mine and the R12a is much better. I can no longer hear the a/c compressor roar, I can no longer feel when it clicks in and out and the power it sucks out of the motor is hardly noticable UNLIKE R134a.

R12a is a more efficient and environ friendly aircon gas than R134a.

Don't confuse R12a with R12. They are two different gases.

yeh i converted it to R134a gas and ever since then have been having probs. 2 weeks after I had it done it built up too much pressure and stopped working. They had to release some gas and it worked again for a few months then the compressor went. I'll have to get the compressor replaced and then fill it with the r12a then.

What gas are you running? Our compressors are not designed to deal with the high pressures experienced with R134a gas.

Find an aircon specialist that is licensed to deal with R12a; a MUCH better option.

I've had both gases in mine and the R12a is much better. I can no longer hear the a/c compressor roar, I can no longer feel when it clicks in and out and the power it sucks out of the motor is hardly noticable UNLIKE R134a.

R12a is a more efficient and environ friendly aircon gas than R134a.

Don't confuse R12a with R12. They are two different gases.

haha ive converted mine to R134a.

The power drain is huge, wouldnt dare turn it on whilst idling at lights :whistling: When coming to a stop, i always put it into neutral and rev a bit so it doesnt stall it self :P

haha ive converted mine to R134a.

The power drain is huge, wouldnt dare turn it on whilst idling at lights :whistling: When coming to a stop, i always put it into neutral and rev a bit so it doesnt stall it self :P

lol mine wasn't quite that bad but it made the car feel very very dull.

  • 7 months later...

i did this and it worked a treat,

also added another wire connecting it to the black side of the diode then ran the wire into my cabin with a switch that connects to ground, now i can turn it on via the switch or via the air con

Say ur radiator temp has rose a bit, just flip the switch and instantly the overheat fan will kick in and aid in cooling your radiator.

  • 3 weeks later...

has anyone tried this on an R33?

I'm about to replace my aircon fan, as mine is seized, and probably has been for some time. although the aircon is still quite good :blink:

now to work out how to get the fan out without removing the fmic :devil: . i tried, but it doesnt look possible, so i unplugged it for the time being.

Edited by Munkyb0y
  • 1 year later...

as hot weather has come around in victoria, this requires a bump up to the top :yes:

took my car to get an AC checkup and they told me to wire in the radiator fan startup.

One question, after turning off the AC is the rad fan still on? or does the wire+diode signal the rad fan to turn off?

  • 11 months later...

Yes, I would like to do this mod on my S2 R33 for this summer! Does anyone know if the fuse layout is the same as the R32's?

Also, does it actually make much difference to the air temps (inside the car) when you've just started the car and it's ultra hot outside, but you're sitting still? I'm finding that for the first few mins it never really cools down much inside if it's >35C outside and I'm not doing >40-50km/h. On the flip side, once I'm doing >40km/h would I really need this 2nd fan going whenever the A/C is on?

Oh, and what happens if the car reaches 91C but the A/C is off? Does the overheat fan stay off? Or, in other words, is the overheat fan now solely controlled by the A/C?

Edited by benro2

will be trying this mod its got 2 be 1 of the cheapest 1s out and it will give me a chance to check if my thermal fan works (i dont trust the 1 the panel beater fitted)

  • 4 weeks later...
took my car to get an AC checkup and they told me to wire in the radiator fan startup.

likewise - when i had my regas done the mechanic also advised running the thermo fan would knock off approx 5degrees from my current internal vent temp which is @ 11degrees

this is a fantastic mod, i'll do this today :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...