Jump to content
SAU Community

Recommended Posts

On 20/10/2022 at 12:03 PM, "G" said:

I meant I want it to work with the thermoswitch as the activator. So i don't have to push any buttons.

replace the existing thermoswitch with a lower temperature one?

That fan has nothing to do with the A/C, it's an overheat fan. Constantly referred to as the A/C Fan, A/C Condenser fan, etc.. when it's actually not.

It can be dual purposed to be one (like most have).

2 minutes ago, "G" said:

I'm pretty sure it won't activate if the ac is not on. Even if the thermo switch reaches 194 degrees.

You're incorrect :) 

Please do not talk in F, it's a JDM and we are Australian. 

We don't want another Mars Climate Orbiter disaster. 

  • Haha 2
8 minutes ago, "G" said:

Nope, it won't activate alone. 

If so, someone has cocked about with your wiring.

The above diagram is from a Nissan Manual, you're telling me they decided to print the wrong information and wire it differently? 

  • Like 1
27 minutes ago, Dose Pipe Sutututu said:

If so, someone has cocked about with your wiring.

The above diagram is from a Nissan Manual, you're telling me they decided to print the wrong information and wire it differently? 

I deleted my air con, everything under the hood. Now it won't activate at all. I want to create a stand alone circuit that activates the fan at 194d. 

Just now, "G" said:

I deleted my air con, everything under the hood. Now it won't activate at all. I want to create a stand alone circuit that activates the fan at 194d. 

it has nothing to do with the A/C, the overheat fan is on its own circuit.

  • Like 1
36 minutes ago, "G" said:

Nope, it won't activate alone. 

 

Just now, Dose Pipe Sutututu said:

it has nothing to do with the A/C, the overheat fan is on its own circuit.

Then as Dose Pipe said your wiring has been stuffed with unless your ECU is not factory, as the fan has its own individual relay.

On the factory ECU the fan relay pin is always grounded, so if you bridge / bypass the radiator thermo switch you energise the thermo fan relay turning the fan on.

I will point out that the relay activation ECU pin is not constantly grounded on full stand alone ECUs like Haltech, Link etc. as they rely on the logic parameters to ground the input. In the case of a Power fc D-jetro map sensor vesion this pin is completely made redundant so the fan will never turn on.

  • Like 1
24 minutes ago, GTSBoy said:

Actually the above diagram is from MSPaint. I took the snip from the original diagram from the manual, pulled out the ECU connections and made it generic for an arbitrary fused power supply, relay, thermoswitch and main load.

I don't see your diagram. 

3 minutes ago, "G" said:

I deleted my air con, everything under the hood. Now it won't activate at all. I want to create a stand alone circuit that activates the fan at 194d. 

Manual states 90c +/- 3c just so we are not talking Fahrenheit rubbish.

  • Like 1
2 minutes ago, BK said:

 

Then as Dose Pipe said your wiring has been stuffed with unless your ECU is not factory, as the fan has its own individual relay.

On the factory ECU the fan relay pin is always grounded, so if you bridge / bypass the radiator thermo switch you energise the thermo fan relay turning the fan on.

I will point out that the relay activation ECU pin is not constantly grounded on full stand alone ECUs like Haltech, Link etc. as they rely on the logic parameters to ground the input. In the case of a Power fc D-jetro map sensor vesion this pin is completely made redundant so the fan will never turn on.

mines ecu.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...