Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Should have a petrol resistant foam rubber sleeve and hose clamp/s to mount it. I've not seen ANY shop including autosparkies that wire things up neat. Kindergarten kids could usually do better!!

They usually use the biggest soldering iron they can find, two rolls of dodgey insulation tape per job, have five twist joins in a 500mm length of wire, and crimp all connectors with a hammer or sidecutters.

LOL f*kn hacks!

What they figure is... if you don't see it.. it wont hurt you...

WRONG MUDAf*kRS!!!

They should take a crash course in how to unf**kthemselves.

OK OK, XXX did it. I spose its not bad to say it because i am sharing information that could be useful, as someone said if they cant see it it wont hurt them (the customer) or something along those lines. thats why i was so eager to get back in the tank and see what they really done.

First and last time to go there, wasnt happy with the service from the start.... i made an appointment at 10am and didnt leave until about 2.45.... but i spose workshops can be like that

i payed $120 for the install only... the pump was supplied by myself.

mods if u think this thread is not within guidelines than feel free to edit.

on a good note i got my FMIC installed today, happy with that and the guy who installed it

**edited by mods - please don't mention names**

I have a similar problem last workshop I left my car to gave me the car with

1 dint in the front passenger panel..denied by them.

1 window seal badly notched "drivers side"

1 side skirt chipped"drivers side"

I need to install cams/afms and retune.

I am not giving it back to these guys.

There work was good but are rough as guts on your car.

PM ME IF YOU WANT TO KNOW WHO THEY ARE IN MELBOURNE.

Probably best course of action if it hasnt been too long would be to sit down and consult with them, and maybe work out some appropriate resolution. but then again its upto how you would proceed in this circumstance. There are many and many dodgey work places, and very few that actually know what the hell they are doing with our cars and even less that will take the time, effort and care with out cars on anything mechanical. Hence why so many people do things themselves. Well one of the many things why anyway.

Noo good even still atleast you got to it sooner than later

it has been over a month since i done it, for the matter of 120 dollars i cant be bothered going back especially since they cant see it while it was installed. they will most porbably make excuses etc etc and highly doubt i will get my money back and i dont think there is anything else they can do for me.. i will just not go back there again

how much diff is the GTR pump over the stock? i would think the GTR would be easier to install than a walbro (aftermarket), I would think the GTR would use the stock mounting brackets etc. pm me the reply with the name of the workshop too. please thanks :)

walbro comes in a kit form and is so easy to install, it has a new hose with clamps, rubber mount down the bottom and pickup filter thing. also has a wiring harness with it. The hardest part is cutting the + and - and crimping/soldering them to the new harness LOL.

GTR pump uses everything the same so u dont need new hoses etc but it is slightly different on the bottom and wont sit in the cradle with the GTST rubber mount so this is where it gets ugly. If u a suitable piece of rubber and half a brain u could make a similar mount but yeah it help to have everything there when ur tank is opened up and u have no car to get bits and pieces lol

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi everyone, I've been wrestling with this for a while now and have been trying to find out the cause. For context, the turbos used are Garrett 2860 -5s, the BOV is a BNR32 HKS SSQV IV kit, the car is currently tuned to ~470 whp on 17.5 psi. The car drives normally, pulls well when it doesn't happen, and I can replicate it fairly easily. It does not sound like turbo shuffle or flutter. The engine has only a thousand or so miles and has had this behavior since it was completed. After my engine was built for my R32 GTR, I noticed that the car now sometimes makes an air discharge sound on what appears to be positive boost pressure that sounds really similar to a BOV. I had thought that it was a BOV issue but even when replacing it with a brand new unit, the sound persisted. It seems like it's coming from the passenger side but I may be mistaken. The closest scenario I could find was this post here https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/ started by @yakshii and it sounds very similar. As in, at partial throttle once I reach positive boost I begin to hear the same psh psh psh psh psh sound like air is leaking somewhere when I keep the throttle in the same position. It most commonly happens in 4th gear at around 3-3.5k RPM and 5th gear around 2.5-3k RPM, which seems to coincide with normal positive boost thresholds. It might be similar to what @Austrian GTR mentioned about his own HKS SSQV. Notable difference would be that when he applies more throttle when it happens, it stops. In my scenario if I apply more throttle during this repeated psh psh psh sound, the cadence of the sound gets faster and louder rather than stopping. If I lift off slightly and apply throttle again, it will normally stop and pull without issue. I've checked all rubber couplers to ensure that they are tight, but have not gotten the opportunity to properly do a pressurized boost leak test. If anyone has had similar experiences or thoughts on what might be the cause, I'd be very keen to hear them. I also have a video of it happening from inside the cabin, if that would make it easier to understand: https://youtu.be/2zqZXcx8jbA
    • I'd want at least $40K for mine, but thats easy to say cos I'm not selling anyway.
    • That's incorrect. We have 4 seasons, consisting of pre winter, winter, post winter and a small glimpse of hope! 
    • I spotted a black C34 in Mittagong this morning!
×
×
  • Create New...