Jump to content
SAU Community

R34 Gtt Forged Pistons

Econ

By Econ,
in Engines & Forced Induction

 Share

Recommended Posts

Econ Newbie

Econ

Posted
Posted

Hello all, I have been on the site for a while now but this is my first post really. I currently drive an R34 GTT and live in the UK and I am looking at doing a top mount turbo conversion on my GTT. I have got most of the parts but I still need to find a few final bits and I was wondering if anyone here would be able to help.

My main problem is Forged Pistons, Over here in the UK company’s don’t list any pistons for the R34GTT and the ones that do say they are the same as the R33 GTST but I have also been told by other R34 owners who have put in R33 pistons not to bother because they are different and if I do my engine will last about 6 months before it goes pop. The only other option I have is to get a set fabricated here in the UK which will cost £1000 + VAT which is a lot of money for pistons so does anyone know of any company in Australia or anywhere for that matter that can source R34GTT forged pistons and would be willing to ship them to the UK?

Also having problems sourcing Nismo 740CC top feed injectors it seems in the UK we can only get 540cc for the R34GTT

Thanks in advance also apology’s if I have posted this in the wrong section

Link to comment
https://www.sau.com.au/forums/topic/161127-r34-gtt-forged-pistons/
Share on other sites
shonen Grand Master

shonen

Posted
Posted

In regards to the injectors

Unless Nismo are making 540cc for the 2007 Nismo range, last time I checked Nismo only made 480cc for the ER34.

The other ones are only available for the R33 series RB25, ie non neo.

Im not sure which highmount your going for, but if its going to be high mounted it will most likely be a large turbo which will make a fair bit of power.

You COULD get away with the 480s but just to be safe I opted for the Sard 650cc which are a straight fit.

Adriano Grand Master

Adriano

Posted
Posted
As far as i know R34 rb25det pistons are not the same as R33. Neo piston have smaller dome + valve reliefs.

Agreed, but ive never pulled a stock NEO apart. The combustion chambers in the head are much smaller, so the pistons must have a smaller dome to maintain the same compression.

Econ Newbie

Econ

Posted
  • Author
Posted

Thanks everyone for the replys some usful information here I will start looking in to them asap. Seems this piston question will go one for ever some say they are the same as the R33 some say they are different. I just dont want to spend 4K on an engine put R33 pistons in and it only lasts 6 months because they are the wrong ones for the car.

Thanks again

SKY 34 Mentor

SKY 34

Posted
Posted
Agreed, but ive never pulled a stock NEO apart. The combustion chambers in the head are much smaller, so the pistons must have a smaller dome to maintain the same compression.

I heard this is part of emission thingy... what people usually do is chuck in R33 forgies and increase gasket thickness to 15mm I think...otherwise there'll be high knock

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...