Jump to content
SAU Community

Recommended Posts

std ecu??? use fuel cut defender?? wat power....u got dyno sheet to show...please list mods and costs........i am very interested

cheers,

daniel

Yes, Std Ecu remapped to suit : RB25 Turbo,exhaust, fmic etc. Factory fuel/boost cut raised, 180 kmh speed cut raised, fuel and timimg adjusted and all checked with AFR meter. Not been on Dyno yet but there is a noticable gain in power and driveability. As for costs, you would be better off talking with Toshi, but I paid $230 for 2-3 hrs work. Well worth it in my opinion.

Just had my R32 Gtst computer remapped by Toshi from this forum and I am quite impressed with the results and would recommend him anyday for a remap in Sydney. Best valued performance gain yet.

do you know if he does r33 gtst ecu remaps? got contact details for him? where is he based?

Remap is the best $400 I ever spent. Was done on a dyno.

With the standard ECU as soon as you add a big exhaust and up the boost they run ridiculously rich ~10:1 afr. With the remap I had it leaned out to 12:1 throughout the rev range/load points. In turn I get MUCH better economy, power is up from 127 to 151rwkw. More top end, smoother idle. Its just so much better. Had the speed limit removed as well.

Highly recommended, just as good as a stand alone ECU as they can do timing and fuel. You still retain your standard knock features, excess air flow cut (if say your waste gate hose splits).

I got mine done via the speed lab, he should be here on these forums do a search. R33 computers are very hard to remap so not many people do them, if any at all.

do you know if he does r33 gtst ecu remaps? got contact details for him? where is he based?

Do a search in the Members section for "Toshi" and he will come up. Not sure about the R33 remap, send him a PM and ask.

Tim

do you know if he does r33 gtst ecu remaps? got contact details for him? where is he based?

Just found his Mobile number, give him a call about the R33 remap etc , Toshi 0410490049, he is at Nth Ryde in Sydney.

Tim

  • 3 weeks later...

R32 remap chip $250(Sydney only).  check A/F and modified ecu(fit socket to ecu) check diagnosis

Remap make real time on the road by emulator. If you want to check on dyno I will come with you.

R33 remap chip for boost up will be $310 (Sydney only)  check A/F and modified ecu(fit socket to ecu)

Check diagnosis , remap make not real time .I will calculation from your cars A/F.

This is R33 auto dyno sheet. s

(red) Std boost (7.4psi) std ECU.152kw

(green) Std boost (7.4psi) my chip. about 170kw

(blue) boost 11psi my chip. 185kw

http://users.tpg.com.au/yuna/dyno%20kw1.jpg

[basic data changes in the chip]

Fuel map

Ignition timing map

TTP max

Remove speed and boost limiter

You be able to request rev limit.

E-MAIL [email protected]

Ph 0410490049

*) About does not work remap performance rom(chip)(lower power than std ecu)

Early, later model has the same fuel and ignition map however, program is different depending on the ecu number (ecu hard ware is different).

I have checked some cheap roms(chip) and programs differ depending on the ECU number as I have mentioned previously.

Some had later model program rom(chip) fitted to early model ecu(eg;mec-212 program rom(chip) fitted to mec-106 ecu.) and some with R32 rom(chip) fitted to cefiro ecu(never start engine).

So, when you buy rom(chip) I would advise you to check ecu number.(MEC-000)

It is best not to buy from places where they are unable to remap chip according to the ecu number.

Same goes for when purchasing secondhand roms(chip). Always check the ecu number.

Also check A/F before ordering the rom(chip). Many R32 appear to have airflow metro or fuel pump problems(If airflow meter is dirty A/F will lean). If remap rom(chip) is fitted when the car A/F is lean, your engine will blow up.

Many people seem to hold questions about remap rom (chip) and a lot of not good condition skylines exist.

So I will start free check now.

When boosted up and fitted a properly tuned rom, your car will most certainly have gained power. (If slower or back fire etc it is most likely due to some trouble on your car)

1)Free program check

If you got remap ecu or remap rom(chip) and feel that there is not much difference or lower power than std ecu,very rich etc, I will free check fuel, ignition map and program.

2)Remap ROM(chip) free trial (Sydney only)

If you are interested in remap ecu and road testing for the difference, you’ll be able to road test anytime.

3)Free check diagnosis(Sydney only)

If your cars engine etc has problem (eg: back fire) I will check diagnosis.

TOSHI(Im motor mechanic)

Ph 0410490049

[email protected]

Toshi do you also offer real time tuning on a dyno so that the map is optimised for a specific car ? Obviously at a different price.

Please tell me what type of engine.

If that has nissan consult port I be able to tune.

Because I need map trace.

toshi, if you have a wideband AFR meter are you interested in doing a little tuning on my GTR? It's running a power FC, but I just want have the lower part of the map looked at for better economy. it's not running in closed loop properly due to fauly 02 sensors, so I want to turn off 02 feedback and just tune the 'cruise' area of the map manually.

Yes,I have wideband A/F meter.

I be able to tuning.

Why you do not change 02 sencer?

toshi, if you have a wideband AFR meter are you interested in doing a little tuning on my GTR? It's running a power FC, but I just want have the lower part of the map looked at for better economy. it's not running in closed loop properly due to fauly 02 sensors, so I want to turn off 02 feedback and just tune the 'cruise' area of the map manually.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
×
×
  • Create New...