Jump to content
SAU Community

Recommended Posts

I get lots of PM’s (every day) from guys with engine tuning problems. A large % of them are from guys who don’t want to spend the money on a tune when they haven’t finished the mods. They are part way through their list of upgrades and only want to get their car tuned once, when it is all finished.

What I tell them is that there are sacrifices that they have to make, put up with less than 100% performance, live with the misfire, tolerate the lousy fuel economy, don’t use full throttle, watch the knock readings all the time, etc etc. They are the facts of living with it untuned, there is no escape from them. Otherwise the mods aren’t working and money is being wasted on them. That it runs worse, is in some ways a good sign, if it runs perfectly then maybe the mods aren’t doing anything.

The problem is a badly running car decreases the enjoyment, a lot. A nicely running car is a joy to drive, by trying to save money they are reducing that enjoyment down to a lower level. Plus they are wasting money with poor fuel economy and in many instances doing permanent damage to the car, not just the engine, but the perhaps the clutch, the gearbox or the diff.

So think carefully about your modifications, the order in which you do them and most importantly the budget you are going to spend over the timeframe that you choose. Then talk to your tuner about your plan. Most of the tuners I deal with are very receptive to repeat business and give price and quality of service advantages to regulars. They want you to come back a few times, they want you to talk to your mates over time about how well your car is being tuned. Their business mostly lives and dies on word of mouth, so a guy who gets his car tuned once only then goes away, is not as good for their reputation as a guy who regularly sees driveability and power increases.

The big advantage of using a tuner more than once is that they get to know your car and you, what it needs and what you like. People who drop in out of the blue, say “tune my car” and piss off, never to be seen again are hardly going to get as good a tune as someone who has been there before. The tuner knows the car, its mods, has the previous dyno runs and, most importantly, knows what the owner wants from it.

In summary, do the usual exhaust, filter, intercooler upgrades and turn the boost up a couple of psi or so. You most likely won’t suffer too badly, although fuel economy will be crap. But once you start slipping on that bigger turbo or adding a few psi of boost, larger injectors, bigger AFM, adjustable fuel pressure regulator etc, then you need to seriously think about getting it tuned. Even if the mods list isn’t fully ticked off.

:( cheers :(

Link to comment
https://www.sau.com.au/forums/topic/164361-delaying-the-tune/
Share on other sites

I do agree, but then again, I'm in the 'middle' stage just as you have described.

Had the turbo done recently and 'want' a retune.....but,

I don't suffer the bad fuel econ. or misfiring, it's just not on FULL potential.

Very soon i will have fuel pump/injectors/AFM and most definately will be paying for a FULL retune.

I'm quite happy to commute every day on low throttle and lose out on the full potential.

I know it's coming and I'm a patient man.

Also, i went back to my original FC tuner (rang him anyway) and said that i wanted the new setup to be tweeked to match the new turbo....New turbo being the only change.

Pretty much full price again.

I can't afford to pay that twice.

Details were :

Original - FMIC/Pod/Zorst/Power FC on 12psi (194rwkws, the usual for R33)

After - Same as above with HKS2535, wanted 12psi there too, does that warrant a full tune again? ..asking as i really don't know but would have thought that 70-80% of the work is already done????

Result - So now on 10psi and low throttle with no change to tune.

what are your thoughts on road tuning gary (or anyone else for that matter)?

my mechanic is a complete gun... gets the job done well, has the patience and attention to detail i've yet to find in other mechanics, but absolutely hates dynos. reason being is that he thinks that it doesn't simulate regular driving conditions as much as being on the actual street.

what he does is throw in a wide band and take it for a "drive" and tunes it on the go. i've seen his road tunes on a 3rd party dyno, and his afr's are dead on perfect and almost always quite a linear power curve. he likes to tune cars with a more progressive power delivery. i don't exactly know how he does it... but i've yet to hear a single negative thing (problem) out of all the cars that have gone there.

obviously on a dyno you can watch everything, and have numerical figures to confirm and diagnose. so again what are your thoughts on this kind of tuning?

It really depends on the tunner.

Persoanlly I use the dyno to get the tune good. then take it out for a drive to tidy up any loose edges and make sure its still aceptable and not pinging on the road.

Im sure sydneykid will agree RB26's are notorious for pinging their brains out on the road despite the fact they behave themselves on the dyno.

The dyno is nice to use as you can review AFR's across a power run but with decent logging you can do that on the street as well.

Another little touch is to drive to the vehicle with the owner after the tune and address any driviability issues they may have straight up. Again I drive the vehicle different to the next guy and he may notice something in the way it drives that I didnt.

Or you could do what im doing.

My first list of mods was your typical bolt on stuff ie: cooler,boost controller,dump pipe ect ect.

Then when i purchased the Power Fc i got the car tuned.Car runs good with no missfire or economy issue.

Im in the "second phase" of upgrades,just got a VG30 BB highflow,Profec B,Z32 AFM and poncams and Nismo injectors will arrive in the coming weeks.Once i have all the parts ill be taking the car to a tuner and getting all the mods and tune done at once.

1) It will work out a bit cheaper

2) Wont be worried about my car running rich/lean while driving it untuned.

3) I think its more rewarding to see your power level increase by leaps and bounds rather than spend a few hundred dollars on an upgrade then only seeing it only produces 5-10rwkw more.

Also there are things you can find on a road tune that you cant on a dyno.Ive had two FC tunes so far and both of them had high knock readings at some part of the rev range.These were dyno only tunes.Next tune will be a $900-$1000 job as i want my tune perfect for the setup ill have,mainly because ill be leaving the engine mods alone for a bit to concentrate on brake,sus and diff.

IMO :thumbsup:

what are your thoughts on road tuning gary (or anyone else for that matter)?

my mechanic is a complete gun... gets the job done well, has the patience and attention to detail i've yet to find in other mechanics, but absolutely hates dynos. reason being is that he thinks that it doesn't simulate regular driving conditions as much as being on the actual street.

what he does is throw in a wide band and take it for a "drive" and tunes it on the go. i've seen his road tunes on a 3rd party dyno, and his afr's are dead on perfect and almost always quite a linear power curve. he likes to tune cars with a more progressive power delivery. i don't exactly know how he does it... but i've yet to hear a single negative thing (problem) out of all the cars that have gone there.

obviously on a dyno you can watch everything, and have numerical figures to confirm and diagnose. so again what are your thoughts on this kind of tuning?

the main issue with on road tuning is you cant hold a specific rpm / speed and load it up

and you have to deal with traffic / road rules,ie you cant just do 160kmh to shift the car around on the map to touch up areas

but the street is defeintely required for light cruise and some extra touch up. ive done mine with a wideband sensor

did a fair bit of ign touch up and cruise afrs. drive in 3rd gear at 30kmh, 3rd @ 40km, 3rd @50kmh etc etc.

You cant legally road tune a car. Simple.

3rd see's well over the posted speed limits.

So if you head to a track, your stuffed.

Best to do it on a dyno, and then if there are issues driving around on the street, have the tune adjusted where its a little off. As you cant really replicate all situations on a dyno. You can get it pretty close, sometimes spot on. But sometimes it might knock in one or two spots. Which is a 5-10min fix :thumbsup:

Thats the exact approach I use Nismoid. I agree its really dumb road tunning a car fully, and anyone who has done it for a living will agree. I know several tunners who I deal with who began tunning cars on the road and now have moved on to use dyno's and run their own tunning shops.

Im personally a fan of road tunning rotories because they are to easy to go bang on the dyno!

NYTSKY there really is no need to fork out that sort of money for a full tune anymore. There are places that still promise the earth when it come to tunning a Power FC, they charge through the nose and deliver a far les than satisfactory result. You have already experianced it yourself.

The way the tune it finished off gives the biggest impression to the driver. Any one car tune a car to a flat 12:1 on a dyno at full noise thats easy, but it takes more to tune a car seamlessly.

  • 1 month later...

Is there any risk of "over-tuning"

Well not over tuning but isn't dyno time the most stress that will be put on the engine etc?

I have put my car on the dyno to be tuned 3 times this year (twice for upgrades and once to try and fix some problems).

Is it best to try and stock pile as many mods as possible and put as many on as you can then have it tuned until the next pile of goodies is ready to go?

A mate of mine said if I keep putting my car on the dyno it will go bang soon and I need to make up my mind exactly what I want and then stop. A rebuild enigne is on my "to do" list but I want to do this in my time, not because I have to.

Cheers

Myths like running a car on the dyno will reduce its life by 10,000km's and so on are nothing but fibs and furphies.

When you think about it, briefly winding the car out in 4th is not out of the cars limit :)

Would be no different to drag run really.

Myths like running a car on the dyno will reduce its life by 10,000km's and so on are nothing but fibs and furphies.

When you think about it, briefly winding the car out in 4th is not out of the cars limit :thumbsup:

Would be no different to drag run really.

But don't drag cars get rebuilt on a regular basis

Car enthusiasts don't risk the health of a motor for no reason, its almost always $$$ related.

As already mentioned on here, its tuners that charge $1k for a full tune on a PFC, and 400 for a "touch up" that make people more content to hang on, and wait till they get [insert here] until properally tuned.

--

Edit: Realized i only ranted the hassles :/ I totally agree in finding a good tuner, to help progress the development of your setup. Although it can rack up the costs a little, your not always going to get charged that same amount for touch ups ;) I think one should try to tune the best combination out of each specific setup; it would give the best comparison of "which mod changed which feeling" which builds a better a understanding. Remember, a smokey farting, stalling import, isn't what its all about.

---

Dyno more abusive then the road is a crock. WOT at a constant RPM while tuning a load point maybe, but i would think having wind resistance, and a constant 70% throttle position in 4th gear up a slight hill would constitute more "time accumulative load" or "engine damage"

Edited by GeeTR
Is there any risk of "over-tuning"

Cheers

Many dozens of WOT high load tuning runs might have some negligible wear, but the majority of time i would say, is spent on low load spots, getting drivability just right… which would have virtually no wear

my 2 cents

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...