Jump to content
SAU Community

Bathurst Group A Gtr V's Zedtt Phillip Island Drag Race

Boosted Zed
 Share

Recommended Posts

Boosted Zed Mentor

Boosted Zed

Posted
Posted (edited)

Zed had overtake boost button. Made my day and worth driving 24 hours there and back for this moment.

GTR_SLOT.jpg

Video

In the pits

Edited by Boosted Zed
Roy Grand Master

Roy

Posted
Posted

Hats off to Gavin for hitting the track in the GIO car...but he has to realise driving an ex Grp A car that he has a target on his back. Everyone wants to go quicker then :thumbsup: But it did look like coming onto the striaght he was giving the GTR everything it had.

Boosted Zed Mentor

Boosted Zed

Posted
  • Author
Posted
hahahah thats awesome! 47's is bloody quick - how much more do you think you had in the car? Hard to go your fastest first time at PI.

Conditions were ideal and the way the car it was prob a second or so in improved driving if had more time in the car as only did 14 laps. With knowledge of the track and learning the lines and with better set up a few more seconds. I realised with so much speed and grip and g forces the shocks were not coping and unloaded and wobbled a bit and unsettled and I should have adjusted harder. I realised this late in the day as I was getting quicker, and mentioned this to Roy. I had shocks set for much lower speed and bumpy Wakefield track. With so much happening and trying to keep it quiet and my session was up I just went with it. Lot of much slower traffic also and I actually passed a Datsun Fairlady convertible on the fastest lap which didn't slow it up too much. I also need to learn how to use the boost controller properly as my mechs are usually with me to fly all this stuff as it was only on 19 psi and could have gone up to 23psi for the straight. Normal boost this day was only 16psi. Temps still get up though as water temp got up to 94c which is still fine but did surprise me, although on the loud peddle for such a long time most of the track especially coming onto the straight and then long straight.

Yes this GIO GTR is still and awesome machine and well built and with good driver would have been much faster than my car, especially with slicks if not old? I did check with the organisers at the start of the day if he was a good driver and knew the track, which they said he certainly did. He obviously was not pushing the car hard other than the straight although probably not on high boost?

This is the first time I have used the push to pass button and will be giving it a big go at Wakefield for Auto Salon Circuit Battle Fridday 27th April and with this and other improvements should do a 1 min 5.

Roy Grand Master

Roy

Posted
Posted

LOL...shouldnt have listened to me :bunny:

John wanted to harden up the suspension, but my 1c was the leave the car as is as he only had 3 laps to go so best drive same car you had all day. No doubt there is plenty left in the car. You were pulling a second a lap out of the car in the last session with traffic. When your times stagnate or only improve by tenths of a second you may be getting close. But you were improving over a second a lap!

Still its only a time...and you need to be careful of not getting cheated at these sorts of days! You get a fixed number of laps, not a timed session. Go too quick and you could see yourself gettng 5 minutes less track time then me over the day. You see, there is method to my going slow :P

Roy Grand Master

Roy

Posted
Posted

..im dirty i wasnt out there. I would have loved to have documented evidence that an R32 GTSt is quicker around PI then the GIO car :bunny: LOL doesnt matter that he was cruising (I understand it was his first time on the track in the car...so probably just going through the motions doing shecks) .

But...my grandkids or 18 yr old girls that i court need not know the difference :P

TurboX Mentor

TurboX

Posted
Posted

Come on John, don't tell us you didn't buy V8SupercarsII to practice at PI before you went there? :bunny:

Think I might trade my GTS4 for a ZedTT !!

Great work, but wondering about the extended exhaust pipe in the pit lane video?

Boosted Zed Mentor

Boosted Zed

Posted
  • Author
Posted
Come on John, don't tell us you didn't buy V8SupercarsII to practice at PI before you went there? ;)

Think I might trade my GTS4 for a ZedTT !!

Great work, but wondering about the extended exhaust pipe in the pit lane video?

That tip extra extension is stage two noise suppression device.

Roy ulterior motives hey. "Yeah John go for it all good, go for it don't change anything." Yeah right. LOL.

Big thanks for your help with the tip fitting. You are a better man than me, I don't think I could turn up to an event like this with out having a go.

Turbox the boys in the house we were staying at had this but I never had a chance to have a go on it as arrived Fri night a 10pm and straight to bed after driving 12 hours or so. I have it at home but can't get excited about it. Played it once when we got it a year ago Oran Park track but I like the real thing only.

Beer Baron Grand Master

Beer Baron

Posted
Posted

yeah john is not really the playstation generation... lol. more of the praystation generation. cause he will need divine intervention if he thinks his push to pass is going to get him around my super wide GTR. I've been getting tips from nathan on this.

Boosted Zed Mentor

Boosted Zed

Posted
  • Author
Posted (edited)
John's zed has got a wide butt. :D:huh:

Big arse zed is 70mm wider wheel track than R33 GTR and Jack that is gold. Like poker raise then all in raise over the top.

Lots of pics

Edited by Boosted Zed
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      "Cheap" bolt on turbo on RB25DET NEO

      By joshuaho96 · Posted

      GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • GTSBoy
      "Cheap" bolt on turbo on RB25DET NEO

      By GTSBoy · Posted

      I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • GTSBoy
      Why am I hitting a power wall with my stroked RB25?

      By GTSBoy · Posted

      You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...