Jump to content
SAU Community

Bathurst Group A Gtr V's Zedtt Phillip Island Drag Race

Boosted Zed
 Share

Recommended Posts

Boosted Zed Mentor

Boosted Zed

Posted
Posted (edited)

Zed had overtake boost button. Made my day and worth driving 24 hours there and back for this moment.

GTR_SLOT.jpg

Video

In the pits

Edited by Boosted Zed
Roy Grand Master

Roy

Posted
Posted

Hats off to Gavin for hitting the track in the GIO car...but he has to realise driving an ex Grp A car that he has a target on his back. Everyone wants to go quicker then :thumbsup: But it did look like coming onto the striaght he was giving the GTR everything it had.

Boosted Zed Mentor

Boosted Zed

Posted
  • Author
Posted
hahahah thats awesome! 47's is bloody quick - how much more do you think you had in the car? Hard to go your fastest first time at PI.

Conditions were ideal and the way the car it was prob a second or so in improved driving if had more time in the car as only did 14 laps. With knowledge of the track and learning the lines and with better set up a few more seconds. I realised with so much speed and grip and g forces the shocks were not coping and unloaded and wobbled a bit and unsettled and I should have adjusted harder. I realised this late in the day as I was getting quicker, and mentioned this to Roy. I had shocks set for much lower speed and bumpy Wakefield track. With so much happening and trying to keep it quiet and my session was up I just went with it. Lot of much slower traffic also and I actually passed a Datsun Fairlady convertible on the fastest lap which didn't slow it up too much. I also need to learn how to use the boost controller properly as my mechs are usually with me to fly all this stuff as it was only on 19 psi and could have gone up to 23psi for the straight. Normal boost this day was only 16psi. Temps still get up though as water temp got up to 94c which is still fine but did surprise me, although on the loud peddle for such a long time most of the track especially coming onto the straight and then long straight.

Yes this GIO GTR is still and awesome machine and well built and with good driver would have been much faster than my car, especially with slicks if not old? I did check with the organisers at the start of the day if he was a good driver and knew the track, which they said he certainly did. He obviously was not pushing the car hard other than the straight although probably not on high boost?

This is the first time I have used the push to pass button and will be giving it a big go at Wakefield for Auto Salon Circuit Battle Fridday 27th April and with this and other improvements should do a 1 min 5.

Roy Grand Master

Roy

Posted
Posted

LOL...shouldnt have listened to me :bunny:

John wanted to harden up the suspension, but my 1c was the leave the car as is as he only had 3 laps to go so best drive same car you had all day. No doubt there is plenty left in the car. You were pulling a second a lap out of the car in the last session with traffic. When your times stagnate or only improve by tenths of a second you may be getting close. But you were improving over a second a lap!

Still its only a time...and you need to be careful of not getting cheated at these sorts of days! You get a fixed number of laps, not a timed session. Go too quick and you could see yourself gettng 5 minutes less track time then me over the day. You see, there is method to my going slow :P

Roy Grand Master

Roy

Posted
Posted

..im dirty i wasnt out there. I would have loved to have documented evidence that an R32 GTSt is quicker around PI then the GIO car :bunny: LOL doesnt matter that he was cruising (I understand it was his first time on the track in the car...so probably just going through the motions doing shecks) .

But...my grandkids or 18 yr old girls that i court need not know the difference :P

TurboX Mentor

TurboX

Posted
Posted

Come on John, don't tell us you didn't buy V8SupercarsII to practice at PI before you went there? :bunny:

Think I might trade my GTS4 for a ZedTT !!

Great work, but wondering about the extended exhaust pipe in the pit lane video?

Boosted Zed Mentor

Boosted Zed

Posted
  • Author
Posted
Come on John, don't tell us you didn't buy V8SupercarsII to practice at PI before you went there? ;)

Think I might trade my GTS4 for a ZedTT !!

Great work, but wondering about the extended exhaust pipe in the pit lane video?

That tip extra extension is stage two noise suppression device.

Roy ulterior motives hey. "Yeah John go for it all good, go for it don't change anything." Yeah right. LOL.

Big thanks for your help with the tip fitting. You are a better man than me, I don't think I could turn up to an event like this with out having a go.

Turbox the boys in the house we were staying at had this but I never had a chance to have a go on it as arrived Fri night a 10pm and straight to bed after driving 12 hours or so. I have it at home but can't get excited about it. Played it once when we got it a year ago Oran Park track but I like the real thing only.

Beer Baron Grand Master

Beer Baron

Posted
Posted

yeah john is not really the playstation generation... lol. more of the praystation generation. cause he will need divine intervention if he thinks his push to pass is going to get him around my super wide GTR. I've been getting tips from nathan on this.

Boosted Zed Mentor

Boosted Zed

Posted
  • Author
Posted (edited)
John's zed has got a wide butt. :D:huh:

Big arse zed is 70mm wider wheel track than R33 GTR and Jack that is gold. Like poker raise then all in raise over the top.

Lots of pics

Edited by Boosted Zed
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • Duncan
      NC MX5

      By Duncan · Posted

      On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...