Jump to content
SAU Community

Recommended Posts

Hey all

im looking to paint my FMIC and the piping (if i have paint left over) black...

the thing is, my cooler is a bit damaged, so i was looking to replace it soonish, so i thought id give painting the current one black a go..

I remember a thread/debate on here saying which paint to use.. So i have a couple of other questions..

1. Which paint do i use?

2. Is it available in spray can or in a bucket?

3. Which will give better results (im thinking can)

4. Assuming i paint the cooler only, should i take the front bar + fmic off? Or front bar only and simply mask and paint the visible parts of the cooler?

5. Do i need to "sand" back the cooler or piping (which is shiny aluminium) ?

6. I just had a knee reconstruction a few months ago, so is it a one man job (fitting the cooler back on)?

7. Cheers :):P

Edited by DjeMz

just paint it matt black....no need to do anything but spray.....but i recommend taking it off the car....it will be easier in the long run.....piant the piping as well.....engine bay wont have a mirror in it....good for defects...

Core: i used a $2 matt black can and a light coating, piping you can get a better finish using a better paint... UHT heat paint for Brakes/enginge parts, if used correctly will look good when you open the bonnet....

there was a debate before on the heat reducing aspect to painting a cooler IE: the thicker the paint the less heat is extracted

Very, very light coat. Otherwise the paint will act as an insulator, keeping the heat in the aluminium and transferring it back into the intake charge. Ceramic coating would be as good as not having an intercooler at all.

and if i completely f**k it up? would ia high pressure squirt from the car wash be enough to take the paint off?

thats why a light coat of cheap paint is best, if you do f#$K it up it will come off with thinners / turps....

  • 4 months later...

In regards to painting the cooler, have had them powder coated in the past, and also seen them powder coated on some high powered cars.

Powder coating gets the best finish, and paint doesn't chip/fade anywhere as easy at cheap shit paint out of a can.

Anyone else had there's powder coated? I will be getting mine powder coated for a mint finish.

I know its an old thread, but me and DjeMz were talking about it and thinking of whats best, so thought I'd bump his old thread up.

Thanks,

Abu

Powder Coat only.

Take the pipes to a local Powder Coater, tell him you want "Satin Black".

He'll probably charge you minimum fee which is normally like $40.

Tell him you want to do do it for cash or beer and it will probably be ever cheaper.

100 times better and more durable than paint.

Powder Coat only.

Take the pipes to a local Powder Coater, tell him you want "Satin Black".

He'll probably charge you minimum fee which is normally like $40.

Tell him you want to do do it for cash or beer and it will probably be ever cheaper.

100 times better and more durable than paint.

Yeah thought so.

SATIN BLACK is the shit. :)

My uncle owns a powder coating factory, so best rates alll thee wayyy:thumbsup:

Edited by abu

i don't think you would want your core powder coated - maybe the pipes, but that stuff is a bit thick. much thicker than spray paint or anodizing that's for sure. powder coat is tough for a reason.

i had mine painted by a radiator shop for $20 bucks. Looks fine to me although it's a little bit glossier than i was expecting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...