Jump to content
SAU Community

Thourghts On This Gtr

phenline
 Share

Recommended Posts

phenline Mentor

phenline

Posted
Posted

just looking at skylines for sale in my state came across this 1 of 10 made? anyone have anymore information on this.

it looks absoultly awesome and the view from the rear is to die for and those rims and wheels damn. cut the link below to view this beast.

p.s anyone else think this is one of the best lookin r32s they have seen?

http://www.carsales.com.au/used-cars/deale...ern%20Australia

Link to comment
https://www.sau.com.au/forums/topic/165379-thourghts-on-this-gtr/
Share on other sites
ProphetR33 Collaborator

ProphetR33

Posted
Posted (edited)

I reckon it's hideous, way too fat backend.

I can think of alot better things to spend $64k on rather than a 14 year old GTR with about 20k worth of mods. That being said, I pretty much hate every veilside kit ever made, so it's no surprise that I don't like this one.

Edited by ProphetR33
Ashy Larry Grand Master

Ashy Larry

Posted
Posted

Car was on an old HPI video.

There was 7 of them just sitting out in a car park.

Fantastic bit of history, but that is pretty steep if you are going to hit the streets with it. Belongs in a collection. It is different and It won't be to everyones taste, but it is special, in the fact that it is a veilside special.

Mike

D-limo Veteran

D-limo

Posted
Posted
Car was on an old HPI video.

There was 7 of them just sitting out in a car park.

Fantastic bit of history, but that is pretty steep if you are going to hit the streets with it. Belongs in a collection. It is different and It won't be to everyones taste, but it is special, in the fact that it is a veilside special.

Mike

No they where the HKS Zero R's or what ever they where called..

It's a hot piece of machinery... Price is rather steep though

eMsta Grand Master

eMsta

Posted
Posted
seen it an old gtr special high performance imports right???i like it but for 64k stick that up ya ass....

yeah....imo, its way too much. But it would make for a good show car.

if you wanna spend 64k, why not just import an r34 gtr :cheers:

NXTIME Grand Master

NXTIME

Posted
Posted
"Panasport 17x10 17x12 G7 C5C2 Rims"

17 by 12's for the rear??? thats insane

Not really. I've seen 19 x 11's on a standard-bodied R32 GTR.

I like the look of this car, but also agree that it's a very steep in price. There is a blue one in NSW/Canberra that won HP heroes at Summernats this year.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...