Jump to content
SAU Community

Recommended Posts

hi everyone,

I know its not the most complex of tasks but its amazing how many ppl in the uk ask this one so I wrote up a tutorial and thought I'd post it up on here too (with your permission)

http://www.anthonymcgrath.co.uk/gtroc/fuelfilter.htm

Link to comment
https://www.sau.com.au/forums/topic/167353-changing-your-fuel-filter/
Share on other sites

you're right it isnt that complicated but that is an awesome write up. your trick with the hot water on the hoses is one i wish i knew before. woulda save me a lot of frustration and skinned knuckles. i tried wd40 lol. cleaned it off at the end but now im forever worrying that i over lubed them and they are gonna pop of and spray fuel all over my engine. :)

  • 2 weeks later...
you're right it isnt that complicated but that is an awesome write up. your trick with the hot water on the hoses is one i wish i knew before. woulda save me a lot of frustration and skinned knuckles. i tried wd40 lol. cleaned it off at the end but now im forever worrying that i over lubed them and they are gonna pop of and spray fuel all over my engine. :P

Cable ties should help to hold the hoses on i reckon ?

just a guess though. lol

That's gold about you pouring the fuel back into the tank. When I did the fuel filter on my mate's car, we were trying to think of good ideas of what to do with the fuel. When doing the filter, it drops a fair bit of fuel. My friend thought the most effective way of not wasting it was to light it on fire (not near car) :)

  • 4 weeks later...

Don't know the part number but any Autobarn Supercheap Bursons etc will have them, just look in the catalogues they have lying around the store and find it - its very similar to the one used on the 300ZXs. (they are actually interchangable, the only difference is the bend on the outlet side of the filter)

ive actually heard that the fuel filter for 300zx are the same fittings but better flowing due to its larger size ;) not sure about its validity but guess you could check up with shops or somewith an old 300zx filter and test fit (with clamps on etc coz u dont want crap going through)

ive actually heard that the fuel filter for 300zx are the same fittings but better flowing due to its larger size :cheers: not sure about its validity but guess you could check up with shops or somewith an old 300zx filter and test fit (with clamps on etc coz u dont want crap going through)

Should be about the same size. It just doesn't have the right angle connection on the top.

I changed mine recently. The hot water trick didn't work for me. I just undid the 2 nuts the hold the bracket and took it off so I could get some easier twisting action on the hoses. Changed the filters within 2mins.

Edited by KeyMaker
  • 2 weeks later...
  • 3 months later...

check with your local supercheap. the place i got mine had two part numbers for the z32, one with the bent fitting and one with straight. i cant remember the brand though. its about 1.5 times the diameter of the one i replaced so gotta flow better imo.

  • 3 weeks later...
  • 2 weeks later...
  • 1 year later...
  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...