Jump to content
SAU Community

Recommended Posts

Hi,

I am currently looking into getting GCG to high flow my current turbo (R33 GTS25T).

This high flow involves:

Turbine Wheel - replaced and upgraded with a inconel(steel) wheel , either stage 1 or 2

Compressor Wheel - replaced and upgraded with T04 wheel, either stage 1 or 2

Bearing Pack - replace with an XTR ball bearing package

Turbine Housing - machine to accept either of the larger wheels

Compressor Housing - machined to accept either of the larger hi flow wheels

Wastegate Actuator - standard or upgradeable to have higher boost pressure as standard.

There are two stages:

Stage 1 = $2250.00 Rated @ 400hp

Stage 2 = $2450.00 Rated @ 450hp, does require other mods i.e. intercooler, fuel, etc

My goal is 250rwkw. Do you think that this highflow turbo will handle this power?

Should I go for the 400hp or 450hp solution?

Has anyone else had their turbo highflowed?

Thanks in advance :spank:

Link to comment
https://www.sau.com.au/forums/topic/16913-gcg-high-flow-turbo/
Share on other sites

I don't have experience with GCG, however to get the power goal you do need more mods then just intercooler or fuel..Do you consider any after market computer?

At 250rwkw, before that, you will hit the limit of your stock fuel system (injectors and pump) and AFM...there are lots of discussion post before, B-man have experience and similar to this setup.

Is it an inconel or steel turbine wheel? They are two different materials with inconel being the superior one.

Just make sure they upgrade the turbine and match it with the compressor wheel. We’ve had 2 r33’s with mismatched turbo’s and one surged so badly I thought the compressor wheel was going to disintegrate.

As for your question, go for the 450hp version. Always handy to have some spare airflow potential in your turbo :P

Thats one way of looking at it that I never really looked at.

Local turbo builders in adelaide have the same deal though.

Buying new garret I suppose would be around the same price possibly.. :) >

I guess the only bonus is that they perform well if you were going to use your old housing essentially.

I remember looking around adelaide and finding it hard to find a builder that will make 240-300rwkw from a stock housing.

Then again there is whatsisnames turbo.. Origionally making 216rwkw with 13psi moving up to 257rwkw still on 13psi.

Originally posted by INASNT

only problem with the gcg stuff is that u have to pay them $2400 for the new turbo plus u gotta give em your old one. So it really costs u $2900 coz u loose the resale value of your old turbo.

Wow - is that right !! Sort of makes you think about it hay....

That's the problem. Do you get a 2535 for $2400 and sell your old turbo for $4-500, or go a highflow for $2400 exchange..

I still don't like the idea of running high boost. It's a shame the HKS's don't start doing much until your over 13psi :)

I wish Matt (Whatsisname) knew the specs on his turbo.. 253rwkw on 13psi !!! OMG :eek: :eek:

How about this?

A GT30-45 with the following:

Turbine bypassing valving-single or dual bypass

Boreless compressor wheel technology

Mixed flow turbine stage

Electronic bypass flow control

Ball bearing technology

Variable geometry turbine (VNT) flow control

GT30V-GT45V double axle vane configuration

Advanced VNT concept technology available

VNT looks interesting

Guest INASNT
Originally posted by -Joel-

New they are over 4k...

They aint that expensive if you buy direct from japan.

U can get the new hks 2835 pro s internal gated with the T3 flange for $3100 from japan. I been trying to get ifo if it will fit in the stock location even tho its the T3 flange coz of the size of the housing on it. I just got the quote a few days ago from greenline.

Guest INASNT
Originally posted by DREMEN

Yeah but its too much mucking around going for a HKS turbo.

I am unsure if most of these turbos will fit in the stock location :D

Thats why I think the high flow idea is better..

Australian manufacturer, warranty, etc.....

its actually quite easy, pay the $$ and in about 7-10 days u will have it at your door step!

And with HKS u know its gonna work and work well!! Just the finish of their stuff is awesome

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...