Jump to content
SAU Community

Recommended Posts

HICAS can cause excessive oversteer when exiting a corner.

Basically if you add alot of power around mid corner, rear of car steps out.

But this is a Characteristic with Any RWD Car with lsd with some power.

Ive found that its actually alot more controlled in the skyline over alot of other cars.

I remember 1 interview on "the skyline story" with the falken GTR and THIS question was asked to the japanese driver, And he said "The hicas is removed to save weight, if the hicas was there, you could corner quicker easier, but overall the benifits of the weight reduction is why they do this"

I reckon if the japanese racers say this, Ill take their word for it. So for my street car. Hicas all the way. all the REst is Hear-say and personal Preference.

you could corner quicker easier

Silver bulletR33, I guess you would have to look at

some lap times, as that should shed more light on

if it's a worthwhile mod or not.

I've seen some footage of a Lemans racecar driver

who reported that a Lemans racecar doesn't feel

right and the suspension engineers change the

suspension settings. The racecar was slower

after some test laps. After a few suspension

setting changes and test laps, the suspension

engineers reverted back to the original settings

they came up with and the racecar was faster.

It seems that what a racecar driver says, is not always

what's the best setting for a racecar.

From what I remember, some GTR racecar drivers find

the rear more predictable without HICAS. It seems

they are used to driving cars without HICAS.

Edited by SKYPER

Got the lock bar fitted. To clarify, the Hicas computer was not unplugged and the steering did not go heavy at low speeds/parking etc.

Also steering through corners feels a lot better, it's more direct, the car goes to where your point it more easily, there's no vagueness or funny feeling in the rear going through and exiting the corner. It's more controlled I guess you could say.

Very happy with it anyway :D

This subject has been pretty much flogged to death, but nonetheless I would like to add my 10 cents worth.

I have driven my car (R32 R) on the track both with & without HICAS.

The reason people (atleast me) remove it is that generating a good lap time requires you to keep the car on its limit of adhesion thoughout the four stages of the corner, ie braking, turn in, mid corner & exit. The HICAS system is (on an R32) reactive, slow & not particularly helpfull.

Take as an example the turn in phase of the corner. In a Gt-R you will be lightly trail braking to help the nose turn in. At this point the HICAS decides you need some opposite phase rear wheel input. It is difficult to diferentiate between the back end sliding (ie you are on your way to a spin) & the HICAS doing its thing. Secondly if you are trail braking you will be carrying more speed at this point than you would be otherwise. HICAS removes the need for so much retardation hence slows you down at a point where it is easiest to make time on your opposition.

So in summary the HICAS system interferes with the feel of the car & by its action makes it slower. It is also heavy.

So why would you want to keep it?

For a properly sorted GTR you don't need to trail brake into any corner, just full throttle around the corner mate :)

If your car understeered then either you did not get on the throttle early enough, you are taking that corner too fast or your car need another appointment at the wheel alignment shop.

What you guys are describing is possibly due to poor wheel alignment or worn out bushes. A properly working hicas system will make the car turn in better and feel a lot smaller. It's only a problem if you have too much power (320+rwkw) and try to control the car with most of that power around the corners. The last thing you need, in this case, is some extra changes in the rear wheels during turning.

Another factor to take into consideration is that the GTR needs good tyres. If you have poor rubbers then it is the same as driving a high powered car around corners (just with a slower corner speed). Removing the hicas in this case may help but you are really chasing your tail rather fixing the problem.

I've driven 320rwkw cars with proper suspension setup and still has hicas. The car still feels so good around fast corners.

My track car has much more power than this and the hicas is disabled.

  • 13 years later...
6 hours ago, Pietro said:

No way to add a simple button to temporarily exclude Hicas at least on electric model? Just to know...

Yes. It would be trivial to do it on any version of HICAS. All you would have to do is trigger a fault by interfering with any of the sensors that the HICAS CU wants to see working. The steering angle sensor would be the obvious one. HICAS will go into "fail safe mode" when faulted. Meaning it won't do anything.

I did it on my R32 because I had no steering sensor. I pulled the smaller of the two plugs out of back of the HICAS CU and it put it into failsafe with no dash light (because the dash light is run from that plug!). I claim credit for discovering that hack, more than 20 years ago.

But, it is just f**king stupid. Take off and kill HICAS from orbit. It is the only way to be sure. Anyone who wants to keep HICAS working doesn't drive their car hard enough.

  • Like 1
  • 3 weeks later...

years ago when my gtr had 240ish kw's and the hicas was operational running stock suspension, i could throw that thing around like a go kart it was amazing the handling and how well balanced it was. but once the hicas shit's itself and everything is worn how forget about ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...