Jump to content
SAU Community

Recommended Posts

I am F*@ken spewin,

A few days a ago I was drivin home from work on Erindale Road (Hamersley) when some nob went thru a Give way Sign and fully F@#kd up the front end of my car!!!

The engine was undamaged (besides the radiator) although a whole new front end was needed so the quote to repair was $20,000 ($5k of this was for the airbags which both deployed!).

The Insurance Coy has written the car off although the salvage on it is a mere $8k. Considering the engine is totally fine and it is a Grade 4 SII - I was really surprised that it will be salvaged for so little...

When I find out what wrecking coy has bought it, I will post it on here as the car is immaculate inside & out and guys who are searching 4 parts may be interested.

Thanks also to the guy who stopped @ the accident scene in the Black 33 to see if I was OK...I am pretty sure he is on these forums and I have seen him on a Perth Performance Cruise...

Link to comment
https://www.sau.com.au/forums/topic/16961-my-car-is-a-write-off/
Share on other sites

spada let me know what insurance company it was with bro and I will find out which auction yard it is going to,

dont worry about the salvage amount its not all that important its the market that drives the price up

hmm unless it has already been auctioned and a wrecker has bought it already

mostly the salvage value comes from a salvage valuator

Hey that was me that stopped that night..... I remember as I heard the accident from my house ( I was leaving around the same time as the crash to go get fuel ). Looking at the accident I thought something like that must of happened.... I knew then it was going to be a write off looking at the damage.... As long as your ok, I guess thats the main thing. Still its very sad to see a car that you put soo much time and effort into destroyed before your eyes...

On a side note, I have been wondering .... Do you have a sister named Melissa???

Thanks for the concern guys...

b005t,

I am havin a look around now 4 a new car, as my settlement cheque is $28k I might look at adding a few extra $$ and gettin a 32 GTR.

NO_RSPECT,

Wrecker has already snapped it up, I will find out tomorrow who it is & let u know(Insurance Co was CGU)

GTS-4OrCeD,

The airbags are amazing, I was only travelling between 60-70ks and as soon as impact occurred they exploded with such pressure that there are all crack marks in the windscreen where the bags hit. The gas that inflates them nearly choked me...

MrGTST,

Thanks for stopping and seeing if I (& the car) was alright. The noise must have been pretty loud hey

Yeah my sister is Melissa, you went to Warwick SHS hey?

Nice lookin car u got there mate!

memphis,

Gearbox is good as gold. I always used Redline Oil in it...

Yep I wen't to Warwick with Melissa.... I was pretty sure you were her brother but I thought I would ask anyways :P Gee I havent spoken to Melissa since school I think.... :D

Thanks for the compliment..... I am happy with the way the car is looking these days :)

I hope you find something as nice as what you were driving as I had seen that around a few times and it looked like it was in really good nick...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...