Jump to content
SAU Community

Recommended Posts

Guest RedLineGTR

Things noticed, that hoses are much more expaned (brand new ones) less fluid in the overflow bottle. Car Seems to take longer to warm up, might be of recent HQ coolant change. Has anyone compaired them to the original ones? Do these high pressure ones add more stress to seals and in future contribute to possible coolant leaks, also maybe water pump seal deteriorate faster, maybe more load for pump...

I replaced the hose going from my radiator overflow to the overflow bottle with fatter stuff. I've noticed lately that my new hose has resulting in much more overflow to the bottle. This is kinda annoying. Anybody know why?

oh and i painted my radiator cap and the car runs that much more cooler now :D

a heavier cap increases the pressure in your system. This actually increases the boiling temperature of the coolant. Eg water boils at 100degrees at 1 atmosphere. The coolant in your system heats up and gets pressurised so that it boils at a higher temp than 100, ie you dont want your coolant to boil as you get steam. Basically i think its supposed to increase the cooling system to operate at a higher temp without blowing its top into the overflow bottle, and as you say, more coolant will remain in the system.

If you hammer the car then a high pressure rad cap is recommended as sly33 stated it increases the boiling temperature. Hence it won't boil.

Try well maybe not but if you click your radiator cap so that it is just sitting there and not holding pressure you will notice that going up hills or when flooring it temps will climb.

That may be true with a stock motor MotoX however if you are making 300od rwkw then after a hard run the coolant in the head will no doubt begin to boil in parts. This is where the higher pressure cap will help prevent this due to the higher boiling point.

the RB30ET motor has troubles with the coolant boiling in the head so you slap a HD rad cap on and it helps prevent it.

For a stock motor it is hardly worth the trouble and as you said you are better off with a decent coolant.

This is also noticible when you have a thick fmic sitting in front of your radiator.. The radiator has trouble keeping the coolant cool.. Twin 12" thermo's fixed this problem for me however on hot days after driving around and around I still get a few problems.

there was one on my car when i got it... never really thought it actually did much... i really should top up the coolant... brand recommended? (im guessing those kmart 5litre bottles are a no no?)

Guest RedLineGTR

havent used any other...first coolant change since i got the car...and whatever crap they filled up in compliance. Just get one that suits you price wise, you usally get what you pay for. Some stuff for like 40buck or a bit less for 5 liters, premade. Redline Oils also have a coolant needs to be mixed with water of some other stuff. Shop around. Your price range.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...