Jump to content
SAU Community

Recommended Posts

Howdy Sandgroupers,

I'm heading over to W.A. at the end of the month for a bit of a motorsport weekend getting a feel for the car and the tracks I'll be using for the Dutton Rally later in the year.

There is a practise day at Barbagallo on Sat June 30th and a CMG day at Collie on Sunday July 1st. Can't tell you much else as far as details but it would be great to see some real cars along at one or both of these days and to see what W.A. has to offer as far as fast Skylines go. From what I can tell the only fast cars over there are EVO's (which is what I'll be driving in) and that just isn't on so it would be super to be shown otherwise. :D

Cheers

Snowy

Link to comment
https://www.sau.com.au/forums/topic/171381-barbagallo-and-collie/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

WAs Fastest Radial tyred Skyline is a DR30 with a basic RB25 lapping(long track) 62.5 with lots of improvements coming followed by a 2wd GTR with low 64s but these wont be at Dutton.Sofar we have not done to well with Skylines in WA in this type of event but the EVOs have been very strong.

I fly in late Friday night and head back the Monday morning. I'll be back later in July for Dutton though.

Well if there aren't YET many fast skylines out there in W.A. but you would like to get into having some legal fun feel free to come along and have a chat. I'm more than happy to talk to anyone that is keen. You guys have some of the best fun stuff you can do over there. Whilst Collie and Barbagallo might not be in the same league as say Phillip Island or Eastern Creek they still look like a lot of fun. And other places like AHG where they hold the regular sprint series and some of the hill climbs you have are awesome and a well sorted GT-R should smoke everyone. I had a play at AHG at Christmas time and its a brilliant facility.

If you get into it you won't regret it - it's the best fun you can have out of bed. :cool:

I own an r32 GTR that is being built for track. Most of my time has been spent at ahg and on the 12th of june i get the chance to run the car at full noise before pulling it apart for new turbos and a few other upgrades. With the sessions at the end of june and in july, can any one attend? What are the car/driver requirements. Oh and hope you have a blast in WA.

Edited by khezz

i'm keen to come out and give the gtst a run on the track,

should have my ap brakes in along with the rest of my suspension bits.

may not be fast but im sure i will have fun :)

got anymore details? or just rock up on the day?

edit: ahg is awsome, i had a track day there few months ago, got to attack the long track too

i'm keen to come out and give the gtst a run on the track,

should have my ap brakes in along with the rest of my suspension bits.

may not be fast but im sure i will have fun :)

got anymore details? or just rock up on the day?

Which event?

Wanneroo

www.wascc.com.au

Collie

www.motoringsouthwest.org.au

http://www.wascc.com.au/ - look at the events Calander and it is just listed as a tuning day. Buggered if I know what's needed for one of those - Blaise has orgnaised it. I just have to rock up and drive :)

From memory there is a little more to it than that. I will have to dig out some stuff (or try to find it atleast) when I get home. Because it is a test/tune day there will be proper race cars there & they don't want just anyone on the track without some preliminary lecturing etc.

WAs Fastest Radial tyred Skyline is a DR30 with a basic RB25 lapping(long track) 62.5 with lots of improvements coming followed by a 2wd GTR with low 64s but these wont be at Dutton.Sofar we have not done to well with Skylines in WA in this type of event but the EVOs have been very strong.

The 31 i built did ok in the Classic Challenge this year , 4th out right was ok for a car we finished 3 weeks before the event ..

I will be driving same 31 in the Dutton so im doing the july collie day to get time behind the wheel :P

Ill be down collie on the sunday to watch the dorift, also there the day before doing a private day and re-learning the track in the car ill be pegging at dutton this yr

yay me

Yeah I'm hoping to get down for the afternoon session at Collie on the Sat too. You staying down at Collie for the Sat night somewhere?

I have all your 06 Dutton W.A. vid's on my PC. Some nice driving there and it looks like you guys had a lot of fun. :thumbsup:

What are you guys entering in this year?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...