Jump to content
SAU Community

Recommended Posts

do your self a favour brother invest in a genuine HKS SS blow off valve with adaptor its not extream flutter or cost (external waste gate = flutter sound) but its sounds almost as good in its primary dump stage (lower boost levels through gears) dont be a boggie MF with your pride n joy it will thank you in the long run GL.

Edited by SXY-33R
hmm its really that simple huh

It sure is. It's about a 10min job(drink the coke, take off bov, trace shape then cut). I did it a while ago, but then the car started to backfire and I got sick of it.

If you like the sound, do it. It doesn't matter what others think. If you like it, do it. You're the one driving it, not them.

Cheers,

Adam

Yeah its as simple as the coke can thing.

I got bored one day and did it. Bout 5 minutes work.

Got sick of the fully sic re VL turbo sound, not to mention the backfiring and the constant stalling. This would also lead to it running rich as f**k and burning way more fuel.

Ps. Don't do it

Hey,

Yeah, wouldnt blocking the bottom of it or whatever your saying stop it from releasing the pressure like it was designed to do and cause the turbo to backspin or something and therefore damage it???

IMO you should just do what SXY-33R said and buy at HKS atmo venting BOV...

bud, i wouldnt dream of doing it to my r34... just to many risks for a bit of fun...

lol well i cant talk because i too wanted to do it before i saw and heard a few dramas people were having when they thought how cool they were heheheeee

point is

now,

flutter = cool

later,

flutter = turbo bang!

cheers

flutter = 25 psi for 1 .a bit years then 20 psi for 1 year = still good, no shaft play. on vl turbo with highflow

usually u put the afm in the cooler pipes and put a metal intake on the front of the turbo for ultimate loudness. and put a pod on or not is up to u. il be doing it tomorrow on my 33 but leaving the afm normal position. u can hear the plastic and doesnt sound as good but my atmo blow off valve still goes off so its like half tutututu half blow off noise. it may go high pitch flutter even through the plastic pipes with the bov hole shut up

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...