Jump to content
SAU Community

Recommended Posts

do your self a favour brother invest in a genuine HKS SS blow off valve with adaptor its not extream flutter or cost (external waste gate = flutter sound) but its sounds almost as good in its primary dump stage (lower boost levels through gears) dont be a boggie MF with your pride n joy it will thank you in the long run GL.

Edited by SXY-33R
hmm its really that simple huh

It sure is. It's about a 10min job(drink the coke, take off bov, trace shape then cut). I did it a while ago, but then the car started to backfire and I got sick of it.

If you like the sound, do it. It doesn't matter what others think. If you like it, do it. You're the one driving it, not them.

Cheers,

Adam

Yeah its as simple as the coke can thing.

I got bored one day and did it. Bout 5 minutes work.

Got sick of the fully sic re VL turbo sound, not to mention the backfiring and the constant stalling. This would also lead to it running rich as f**k and burning way more fuel.

Ps. Don't do it

Hey,

Yeah, wouldnt blocking the bottom of it or whatever your saying stop it from releasing the pressure like it was designed to do and cause the turbo to backspin or something and therefore damage it???

IMO you should just do what SXY-33R said and buy at HKS atmo venting BOV...

bud, i wouldnt dream of doing it to my r34... just to many risks for a bit of fun...

lol well i cant talk because i too wanted to do it before i saw and heard a few dramas people were having when they thought how cool they were heheheeee

point is

now,

flutter = cool

later,

flutter = turbo bang!

cheers

flutter = 25 psi for 1 .a bit years then 20 psi for 1 year = still good, no shaft play. on vl turbo with highflow

usually u put the afm in the cooler pipes and put a metal intake on the front of the turbo for ultimate loudness. and put a pod on or not is up to u. il be doing it tomorrow on my 33 but leaving the afm normal position. u can hear the plastic and doesnt sound as good but my atmo blow off valve still goes off so its like half tutututu half blow off noise. it may go high pitch flutter even through the plastic pipes with the bov hole shut up

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
    • Run it in open loop for now, and drop the frequency down. This lowers the resolution and requires more duty cycle to do anything, however good to troubleshoot.
    • According to Josh, one of our local Americans, it seems the USA still can't get turbo systems quite right at a lot of places, so possible that they're not running great at all, but they've just not complained as NFI about getting it right...
×
×
  • Create New...