Jump to content
SAU Community

Recommended Posts

Guest RedLineGTR

from what i have heard and personally use...also whats in your budget...i use shell helix 5-40 full syth like $45-50 for 5 litres. Also Motul in nice and you can go for redline, royal purple, if ya got the cash, but for a skyline oil changes every 5000k its abit expensive. I know a couple of people who use mobil 1, some people say it runs black really quickly after like 500km. You could also try Castrol they only make oils as compaired to some other companys.

Guest RedLineGTR
Originally posted by hippy

another question .. what is the cheapest high quality oil??  hmmm ... ??? ;)

Oils that a good for skylines do not go any cheaper than $50 for turbos...and i would not say thats cheap for a normal car non turbo lets say like a ford or something oils cost about $30 bucks or abit more depends on quality. About $50 is a good start.

Just because Mobil 1 goes black doesnt mean its not working. Viscosity is extremely important and probably more important than the brand of oil you choose. Engines are designed around having a particular thickness of oil running in their oil galleries, lifters etc. A thicker oil may not guarantee more protection because it cant move as quickly or get into the small areas in the same manner a thinner oil would.

Personally I use Mobil 1 Trisynthetic 10W/30 and i find it to be fantastic, even at $18 a litre. However the Motul do make a very good product.

Red17

Guest RedLineGTR

yep i'm aware that that it dosent mean that mobil 1 isnt working. Also about the Viscosity of the oil is important...Personal experience i tryed Castrol formulaR like $80 5 litres 10-60w seemed abit high but wanted to see if it made a diff. Changed the oil the oil pressure on the stock guage was really high, ( i know it it inaccurate some times but i was verry different compaired to usual) changed to my shell oil was abit better after that but wasent like how i wanted it. Flushed the engine out with a nulon product for oil. This is not recommended for older car. Wokred a treat and refilled with shell. Now the car is perfect normal pressure. Shell Helix ULtra 5-40. Filters were changed during each oil change.

The first number is the most important. You want it to be no higher than 10, so that the oil circulates quickly on startup. Fortunately almost all good synthetic oils are from 0W to 10W so you shouldn't have a problem there.

I am currently using Castrol Formula R 10W-60, and I think the second viscosity number is too high. My oil pressure is good (a little over halfway when warm), but I think the viscosity is overkill and is only hurting my power and economy. Therefore on my next change I am going to use 5W-30 and see how that goes.

The Castrol 10W-60 is still good stuff, and you might need to use it if your engine is a bit worn and burning/leaking a bit of oil. I'm not using any at all which is why I'm going to switch to the 5W-30, but as my engine wears out over time I will switch back to it. Hopefully not for another 100 000km or more :P

Oh, and definitely don't use mineral oil. Use a full synthetic (preferable) or a semi synth at the very least. Mineral oils break down too quickly. Change the oil every 5000km or sooner and you should be ok with a semi synth. My preference is still with a full synth though (still with 5000km oil dumps).

I've used both Mobil 1 0/40 and Motul 300V 15/50

Personally i find the Motul better - it has stayed clean the whole time (i am due for an oil change now), has not used a drop and still feels fantastic. Mobil 1 is excellent too, but i found it discoloured a little quicker (discoloration = wear?) and seemed to 'go off' or feel slacker quicker. But like someone said above, a change every 5000k and either one of these oils look abit expensive - for the Motul i got 4L for 70 bucks!

Oil staying clean means that it is not doing its job properly. You want your oil to go dark fairly quickly because that means it is absorbing all the crap that your engine produces. If it's not in your oil it's grinding away at the internals of your engine!

I look at the very thin edges of the oil on the dipstick to tell if other cars' oils have become saturated with contaminants or not. On my cars it's always got a slight golden hue on the edge. Some cars overdue for a change are black right to the edge. While you still have a bit of gold in it that means it's still got enough cleaning properties in it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...