Jump to content
SAU Community

Recommended Posts

C&B off these forums... i got a hevy duty clutch for $300

flywheel machining should not be anymore than $50, although mine didnt need it just needed a sand down

i paid $300 for fitting... not that much of a hard job.. included all fluids and what not too.... by my trusted mechanic...

hope that helps

I got the exedy heavy duty from powerplay for 380 delivered last year

dont know on pricing now but I got shitfit to fit it....was about 300-350 labour?

around 800 all up I think fitted

I got the exedy heavy duty from powerplay for 380 delivered last year

dont know on pricing now but I got shitfit to fit it....was about 300-350 labour?

around 800 all up I think fitted

:| at that labour!

1 hr to do mine, on the ground.

corrine.if you can change a clutch in an hour you can come and do mine.:D

i can do it myself though it means a bit of time of the road.liek a few days.with class and what not i wil be run off my feet.ive done it before though, on the skyrine and a swift.time is precious coming up to fri night at driftland.

i might do it this weekend im still undecided as to what way to go.the only thing that will fek me is the turn arround on the clutch reco.

dif, did it only take you 1 hour to do it on the ground really?

I've got a clutch to go into mine, just building up the confidence to do it atm.

I've got all the equipo, just need confidence. Hahaha, you know like when you start a job, and it's like hmmm, that's impossible. then you look at it, do a bit more, and next thing you know, it's done.

1 hr to do mine, on the ground.

1 hour! All i can say is :D

It took me and a couple of mates 5 hours to do an R32 GTR clutch (no flywheel removal) on the ground. A GTR is more difficult, but still....

corrine.if you can change a clutch in an hour you can come and do mine.:)

i can do it myself though it means a bit of time of the road.liek a few days.with class and what not i wil be run off my feet.ive done it before though, on the skyrine and a swift.time is precious coming up to fri night at driftland.

i might do it this weekend im still undecided as to what way to go.the only thing that will fek me is the turn arround on the clutch reco.

Risking did it.

Pay for the time and he might do it?

dif, did it only take you 1 hour to do it on the ground really?

I've got a clutch to go into mine, just building up the confidence to do it atm.

I've got all the equipo, just need confidence. Hahaha, you know like when you start a job, and it's like hmmm, that's impossible. then you look at it, do a bit more, and next thing you know, it's done.

I didn't do it. Risking did.

I would have no F ing idea how to change a clutch.

1 hour! All i can say is :(

It took me and a couple of mates 5 hours to do an R32 GTR clutch (no flywheel removal) on the ground. A GTR is more difficult, but still....

I think it was less then an hour maybe 50 mins or so but it was def sub 1 hour

PS: last guy that did my clutch charged me $140 including bearings. He had never done a skyline box before. Took his time, took a bit over an hour, but it was on a hoist.

Hi mate.

what what was the total overalll cost.

where did you get it done at.

did you buy a brand new clutch?what type?cost etc..

sorry about the 20 questions.

Corinne.bad choice of words. :laughing-smiley-014:

45mins to an hour on the ground by myself. I do GTR boxes in the same time same conditions. Occasionally need help getting the GTR box back in but 8/10 its a solo effort.

By the time corinne was driven from her place to mine the job was done.

Have a go its not hard to do if you have patience and be sure to line the clutch up properly.

realisticly its a 1k drive in drive out suply and fit . if its cheaper happy days.

no doubt dave.

it's looking like i will just install my self at the current quotes i have been getting.this allways ends up happening with me.i look into getting it done through a pro and then i end up doing it myself anyway.

risking

youve got it down pat there mate.prolly nore like a weekend for me.i might even go out and buy a new clutch as well now.just so i can have the car finished on the weekend.it will probably be a rainy one at that so there is no better time for it really is there.

anyone want to learn how to put a clutch in a 33 :worship:

I got an EXTREME CLUTCH set. See http://www.xtremeclutch.com.au/. Clutch + Fly wheel and pressure bearing. It was fitted by one of the members here. I was a touch unsure to do the job but he done in around 2 hours. Great job, can not complain....but you get what u pay for.... The kit costed me around 1100 dollars, labour I can not comment.... THANK YOU BRETT. I am happy to give him a plug here if he wants me too. Now he just started his own business and experience from Porsche really helped. he is a great guy and I am sure he will be discovered by lots of Skyline lovers....

Cheers,

EUGEN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...