Jump to content
SAU Community

Recommended Posts

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

copied from the Japanese who wanted to look different - just a whole lof of "me too"

if it actually functioned better the recommended fitments from manufacturers would reflect a 225 width tyre on a 10" rim.

all motorsport has tyres which fit the rim properly - eg. V8s, touring cars, F1 etc etc.

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3192520
Share on other sites

yeh, like he said, it's got no real practical purpose but to look cool

I guess on drift cars, the less tyre on the road (at the back) = the better, so stretched tyres = less on the road (because they bulge in the middle)

from a grip standpoint, your getting less tread on the road though

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3192554
Share on other sites

yeh, like he said, it's got no real practical purpose but to look cool

I guess on drift cars, the less tyre on the road (at the back) = the better, so stretched tyres = less on the road (because they bulge in the middle)

from a grip standpoint, your getting less tread on the road though

although on high speed corners it feels like there is less flex in the wall. i just got new tyres (un streatched) 225 and it is now apparant on corners that the tyre has a little bit more give in it. just my two cents.

Edited by GTS_Retro
Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3192598
Share on other sites

yeh retro, there will be alot less sidewall on stretched tyres, so less movement, but better to just go a lower profile and have the same size footprint on the road, like you've done now, than stretch the crap outta them and scrooge up your traction

Edited by r32 gts-turbo
Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3192648
Share on other sites

also stretched tyres means you can have a wider rim under the car as it won't hit the guards as easily.

Wheels are there to hold your tyres. What's the point of running a wider rim if you're not going to use that width to crowd more tyre onto? All that extra metal would be unsprung ballast.

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3193726
Share on other sites

Wheels are there to hold your tyres. What's the point of running a wider rim if you're not going to use that width to crowd more tyre onto? All that extra metal would be unsprung ballast.

a lot of rims don't come in skinny sizes, and cars like sprinters don't have much room under the guards

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3193884
Share on other sites

anyone know if 234/45/17 can be stretched onto the rear 8.5 inch wide rims?

Yeah, shouldn't be an issue.

I've stretched a set of RT215s in that dimension onto a 9.5" wide rim, and even with the amount of abuse I've put the car through I haven't had any problems.

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3195363
Share on other sites

I have 235/45/17 on 9 inch wide rims. Reason - they came that way. And when i replaced the tyres i was scared that any wider would rub.

So you will be fine, i've driven over 100,000km in my r32 with these sized tyres. Its the extreme streching you have to be wary of.

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3195673
Share on other sites

Its all about side wall flex and eliminating it. With stretched tires there will be less if any side wall flex which makes the car more predictable and easy to control when drifting.

Also an easy way to fit bigger wheels inside your guards instead on flaring or scrubbing!

Link to comment
https://www.sau.com.au/forums/topic/173783-stretched-tyres/#findComment-3196219
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...