Who Wants Gtr Brembos?

[Roy]

Probably not the best place...but looking for someone who wants some GTR Brembos. I need some rears and its easier/cheaper to buy a set of a wrecked GTR. So if someone is after some can you please PM me...and we can split the cost of the setup

[robbieraver]

err maybe im just retarded but are you selling the brembos and want some stock ones and only the rear.

[Roy]

Sorry. To clarify. Its near impossible to buy GTR rear calipers by themselves. When you do find them they are normally about the same price as fronts. However, there are often full sets of fronts and rears for sale at reasonable prices. So im hoping someone who wants the frotn Brembos to team up with me and we split the costs, and both benefit on a reasonably priced upgrade

[mahartika]

i would be intrested in fronts what cost do you have in mind.

[Roy]

pm me your email address, ditto anyone else interested

[Slim Mat]

The Brembos should fit on an R32 GT-R yes?

What are the specs on the later model GT-R brakes?

[Duncan]

yeah they bolt straight onto a 32

32 had 296x32mm rotors, the brembos are 324x32mm. Both are 4 spot calipers but the brembos are a little larger

[Ronin 09]

can i have my rears back?

[Roy]

Sure, but you have to come and get the,

Yeh the R33/34 GTR Brembos are also 4 piston caipers, just like the R32 GTR calipers. The calipers have differential piston bores, meaning the leading pistons are smaller then teh trailing pistons to help even out pad wear and pad temperature. The pistons of the R33/34 calipers are also slightly larger the the R32.

So thats the caliper difference, the added rotor difference is that you go from 296 x 32mm to 324 x 30mm. Though you will find that almost all R32 replacement rotors are 296 x 30mm .

[Slim Mat]

OK, I will have a think about it, but don't wait for me.

I was thinking a brake upgrade, this might be a cheaper way to go, won't be as good as getting 6 spots with larger slotted disks or something like that though.

[robbieraver]

il take the fronts for sure.

and you have pm roy.

Edited June 27, 2007 by robbieraver

[T04GTR]

I SHould clarify that the 34 ones use a bigger rear disc at 322mm and dont bolt right up. the fronts also are the same 328x30 but the calipers use a m14 bolt so you need to drill out your knuckle.

[robbieraver]

no worries to4gtr.

[Duncan]

Dave both differences are 34 only....33 brembos bolt straight on front and rear.

[Ronin 09]

I thought std R34 are 300 rear and the V-Spec (II?) are 322mm rears?

that's what the DBA catalogue says...

PS zac the car is NICE

[Psymon]

2 questions...

How much mucking around to get them on a 32 GTST

and

Whats the rough price i'm looking at for the calipers?

[Roy]

Provided you have the rotors and calipers they are a bolt on upgrade. If you still ahve the std stne guard that has to be removed to claer the larger rotor. Most ppl make do with tehst dbrake line as well.

Price...who knows. im not selling them, im just tryign to get someone to go in with me to split up a set. For the fronts you will be looking at around $1000-1200 including rotors. Though who knows how much meat will be left on the rotors

[Willo]

I thought std R34 are 300 rear and the V-Spec (II?) are 322mm rears?

that's what the DBA catalogue says...

PS zac the car is NICE

Correct, but last time I looked DBA didn't have a 322mm rear rotor for a BNR34. The 350z rear rotor is 322mm though.

Speaking of BNR34 brakes, I have a full set for sale with Project Mu HC+ pads and nismo lines...

[Ronin 09]

Correct, but last time I looked DBA didn't have a 322mm rear rotor for a BNR34. The 350z rear rotor is 322mm though.

Speaking of BNR34 brakes, I have a full set for sale with Project Mu HC+ pads and nismo lines...

yep i had a set of 322 350z rotors and was going to make an adapter. too hard basket, sold the rotors...

[Snowman]

I thought std R34 are 300 rear and the V-Spec (II?) are 322mm rears?

that's what the DBA catalogue says...

PS zac the car is NICE

This man is right . Mine definitely weren't 322mm when I had them. The was for the V Spec II's only. No idea why though - they were already over braked in the rears with the smaller rotors....