Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

If its the same as anything (S1 I am assuming?) then it will be the same as R33 GTS-4. In my experience the GTR's have everything just a little chunkier. (front driveshafts for example)

Do us all a favour, and if you do get the Nissan one, can you ask the counter monkey to compare the part number to the GTR and GTS-4 and let us know the results?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3201027
Share on other sites

If the boot has split, and the grease is all over the inside of the wheel, what sort of life expectancy do you give the CV? I would replace it, myself, just to be on the safe side. Have you ever seen the damage a CV does when it lets go?

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3201158
Share on other sites

For your info, the stagea outer boot kit part number is 39241-50A92, and FAST shows it as being the same

for the 260RS, GTS4 and GTR.

You rock! :mrt:

I don't suppose you got the same info for the CV themselves?

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3201460
Share on other sites

Thanks dude :P See you now an again cruzn round the terrace newy,nice stagea man :mrt:

Cheers mate, that's what we're here for :) . Be good to meet up some time, you should cruze down to the SnS with the rest of us.

I'll have a look at the CV comparison later tonight, and see what the go is.

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3202690
Share on other sites

Just take it to any reputable CV speciallist around you and get them to do it for you :P

nice and easy.. less down time than doing it yourself

and depending on what the condition of the CV joint is when you take it apart .. it may or may not need servicing. Dont stress its all too easy! just a few hours waiting around for them to do it

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3202698
Share on other sites

Just take it to any reputable CV speciallist around you and get them to do it for you :thumbsup:

nice and easy.. less down time than doing it yourself

and depending on what the condition of the CV joint is when you take it apart .. it may or may not need servicing. Dont stress its all too easy! just a few hours waiting around for them to do it

I second that. I had the same problem on mine - right cv boot. Took it to a CV joint specialist and had the boot replaced for $80. Apparently no problems with the cv joint itself. :dry: Hopefully yours is the same.

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3205006
Share on other sites

  • 3 weeks later...

Has anyone actucally had their CV Joints replaced yet. (I'm particularly interested in hearing from Brisbane peoples). My boots are split and grease on the inside of the wheel. Now not ever having anything to do with CV's before (damn AWD FWD cars :) ) what are the costs like. And is it a job for any normal mechanic or is it better to see a CV workshop (see plenty of them in the yellow pages). My girlfriends pulsar is also in dire need of CV's too (because I just got the boots replaced on hers and the joints didn't last too much longer before the knocking started) so I just might as well kill all the birds with one stone.

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3230970
Share on other sites

if you can find a good ( reputable ) place then your FAR FAR better off just taking the cars to them and letting them do it. I have attempted to do the outer boot on a pulsar CV joint and it was a royal ass pain . these guys at the CV shops have

A) all the tools etc needed to do the job correctly

b) spare parts etc

c) the know how of what to do etc.

I know Dale ( stinky rooster ) has an abject fear of letting others do his mechanical work .. but I would dare say even he might agree with me on this matter.

CV joint place all the way

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3233285
Share on other sites

I don't think you guys read the post properly. I wasn't asking if it was an easy job for me to do but wether it would be better to take it to any normal mechanic or to take it to a specialised CV / Driveline workshop. Be fu**ed if I'm going to do something like this myself. And my cars rearley see a workshop either unless its something I really don't want to do.....this is one of those things. I really just wanted to know what costs are like.

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3235283
Share on other sites

Sorry for getting Off topic

Yeah I would take it to a C.V place. Because if you took it to your local mechanic he would probably just order in the parts from a CV place. My logic is that fixing CV joints is their ( the CV people ) bread and butter , so you would guess they would know them better than a standard mechanic.

Link to comment
https://www.sau.com.au/forums/topic/174430-split-cv-boots/#findComment-3235296
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...