Jump to content
SAU Community

Snow Mode In The Evo

saff_cossie

By saff_cossie,
in Victoria

 Share

Recommended Posts

saff_cossie Grand Master

saff_cossie

Posted
Posted

Hi all

Having owned the Evo for just over a year now, I thought it was time to try the Snow mode for real in preparation for a planned trip to the snow in a few weeks.

I went up Mt Donna Buang (a recent SAU cruise also went up there) after lunch in Healesville yesterday.

Despite having to pay to go up the mountain at this time of year and having no parking at the last car park before the summit, we had a great time. Took a few pics in one of the lower carparks as all the roads were pretty well salted.

Having only used Snow mode on the DECA skid pan in the wet to any benefit, I was keen to see what it can do and I must admit although I was far from driving hard, it felt a lot more balanced than any other mode.

So to conclude, yes it feels like it makes a difference and gave me a good opportunity for some pics :thumbsup:

post-9226-1183973529_thumb.jpg

post-9226-1183973603_thumb.jpg

post-9226-1183973811_thumb.jpg

post-9226-1183973868_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/175889-snow-mode-in-the-evo/
Share on other sites
Jamezilla Grand Master

Jamezilla

Posted
Posted

Emsta - the ACD settings (Tarmac, Gravel, Snow) adjust the way the car behaves depending on the surface you are on.

By telling the car you are on snow, it limits throttle response and forces a tendancy to understeer when pushed. Basically meaning you just continue to drive the car as you would normally - it makes all the adjustments for the change in surface.

ferni Grand Master

ferni

Posted
Posted

Cheaters.

I drove Beefy's EVO9 on the weekend, very nice i like it. Very punchy/responsive, but lacks top end - but that is to be expected being stock... didn't get a chance to throw it around any corners but it felt responsive steering wise as well.

saff_cossie Grand Master

saff_cossie

Posted
  • Author
Posted

After losing my last reply to a database error!

Thanks all, I had a lot of fun all be it driving quite cautiously due to the weather and having the g/f on board. There is a taboggan run at the top but couldnt get a park so had to come back down unfortunately.

Emsta - As James says.

My understanding is the Tarmac, Gravel, Snow splits the bias to front and rear wheel drive percentage. Snow 50/50, Gravel 60/40, Tarmac 70/30 (rear/front). There are more agressive mods out there to split it further such as MOTEC and there is a Ralliart ACD controller also.

:D

Blade Experienced

Blade

Posted
Posted
My understanding is the Tarmac, Gravel, Snow splits the bias to front and rear wheel drive percentage. Snow 50/50, Gravel 60/40, Tarmac 70/30 (rear/front). There are more agressive mods out there to split it further such as MOTEC and there is a Ralliart ACD controller also.

;)

ratio is always 50:50, acd just controls release time of diff, tarmac - fast / gravel - medium / snow - slowest

eMsta Grand Master

eMsta

Posted
Posted
Emsta - the ACD settings (Tarmac, Gravel, Snow) adjust the way the car behaves depending on the surface you are on.

By telling the car you are on snow, it limits throttle response and forces a tendancy to understeer when pushed. Basically meaning you just continue to drive the car as you would normally - it makes all the adjustments for the change in surface.

ah...so its similar to the Dynamic stability control that we find on BMWs and alike and also like the GTR's, when the front wheels lose traction, the rears hold the traction?

West Grand Master

West

Posted
Posted
ah...so its similar to the Dynamic stability control that we find on BMWs and alike and also like the GTR's, when the front wheels lose traction, the rears hold the traction?

I'm pretty sure its not,

Its the actual torque transfer to individual wheels and its only available from R33Gtr V-spec onward. I don't know much about the Dynamic Stability control, is it a bit like the what they call Brake Distribution Force something?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ShezzDogs
      R34 Skyline Sunroof Won't Tilt/Vent

      By ShezzDogs · Posted

      Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
×
×
  • Create New...